Instructions

Cleaning and care
58
Checking the filters in the
wash cabinet
The filter combination in the base of the
wash cabinet retains coarse soiling
from the suds solution, preventing it
accessing the circulation system and
re-entering the cabinet through the
spray arms.
 This appliance must not be used
without all the filters in place.
Collection of coarse soiling may cause
the filters to clog. The level of soiling
and time it takes before the filters need
cleaning will vary depending on use.
The message Check filters will appear in
the display after every 50programme
cycles (factory default setting).
You can set the interval for this
message to appear between 30 and
60programme cycles (see “Settings
menu - Check filters”).
 Check the filter combination.
 Clean it if necessary.
 Then confirm the message with OK.
The message will go out.
Cleaning the filters
 Switch the dishwasher off.
 Turn the handle anti-clockwise to
release the filter combination .
 Lift the filter combination out of the
dishwasher . Remove any coarse
particles and rinse the filter well
under running water.
Use a nylon brush if necessary.
 During cleaning ensure that
course soil doesn't get into the
circulation system and cause a
blockage.