Instructions

Problem solving guide
60
With the aid of the following guide, most minor problems can be corrected without
contacting Miele. In many cases this will save you time and money because you
won't need to book a service technician.
Please note that a call-out charge will be applied to unnecessary service visits
where the problem could have been rectified as described in these operating
instructions. Please note:
 Repairs must only be carried out by the Miele Professional Service, a Miele
authorised service agent or a suitably qualified technician in accordance with
local and national safety regulations. Unauthorised or incorrect repairs could be
dangerous and cause injury or damage to the appliance.
Technical problems
Problem Possible cause and remedy
The display remains
dark and the Start
indicator light is not
flashing after the
dishwasher has been
switched on with the
button.
The dishwasher is not plugged in.
 Insert the plug and switch on at the socket.
The circuit breaker has tripped.
 Reset or replace the circuit breaker (see data plate
for minimum fuse rating).
The dishwasher stops
during a programme.
The circuit breaker has tripped.
 Reset or replace the circuit breaker (see data plate
for minimum fuse rating).
 If the circuit breaker trips again, call Miele
Professional Service.
The door locking pins
do not retract after the
door has opened
automatically.
There is a fault with the door mechanism or the door
has not been correctly balanced.
 Call Miele Professional Service.
The AutoOpen function must be switched off
before the dishwasher is used again (see “Settings
- AutoOpen”). Danger of injury in the unlikely event
of another fault.