Instructions

Settings menu
80
Rinse aid
You can adjust the rinse aid dosage for
best results.
The dosage amount can be set
between 0 and 6ml.
The rinse aid dosage can turn out to be
higher than the set value due to the
automatic adjustment of the
programme.
If spots appear on crockery and
glassware:
– Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
– Decrease the rinse aid dosage.
 Select the setting you want and
confirm your choice with OK.
External dispensing
Activate automatic dispensing of liquid
detergent if you have installed the
optional external dispensing module.
The DOS module is supplied with its
own installation instructions.
 Select the setting you want and
confirm with OK.
The setting will remain active until
you deactivate “External dispensing”.
When using liquid dispensing via an
external DOS module, you can
dispense the detergent according to the
detergent manufacturer's instructions
as a percentage or in millilitres per
minute.
Detergent quantity
The following functions will only
become visible when external
dispensing has been activated.
A detergent amount of 0.50% is set as
standard. The dispensed quantity can
be modified between 0.1 and 2.00% in
increments of 0.05%.