Instructions

Settings menu
88
2nd interim rinse
You can increase the cleaning
performance in the case of stubborn
soiling by selecting a second interim
rinse. This function is not available for
all programmes (see “Programme
chart”).
 Select the setting you want and
confirm your choice with the
OKbutton.
Brightness
There are seven different display
brightness settings.
 Select the brightness you want and
confirm this with OK.
Memory
With the Memory function activated, the
dishwasher will save the last
programme selected.
When you switch the dishwasher off
and back on again at the end of a
programme, the last programme
selected will appear in the display
instead of the ECO programme.
 Select the setting you want and
confirm with OK.
Refill reminders
If you only ever use multi-function
combination products in your
dishwasher, you can switch off both
refill reminders for salt and rinse aid if
you wish.
 Select the setting you want and
confirm with OK.
If you switch to using detergent that
does not contain salt or rinse aid, it
is important to remember to add salt
and rinse aid and to switch the
reminders back on.
Check filters
You can adjust the interval at which the
message to remind you to check the
filters appears.
You can set an interval of between 30
and 60 programme cycles.
The “Check filters” message is set at
the factory to appear after every 50
programme cycles.
 Select the interval you want and
confirm this with OK.