Instructions
Operation
46
Energy management
To save energy the dishwasher will
switch off automatically 10minutes
after the last time a button is pressed or
after the end of a programme.
Press the button to switch the
dishwasher back on.
The dishwasher will not switch off
whilst a programme or the FlexiTimer
is running or if there is a fault.
Programme end
At the end of a programme, the In-oper-
ation indicator light will be visible flash-
ing slowly with the door shut. The
buzzer might also be sounding.
The programme has finished when
Finished appears in the display and
the door has opened slightly (if applic-
able).
The drying fan may continue to run for
a few minutes at the end of the pro-
gramme.
Open the door completely to re-en-
gage the door closing mechanism.
You can now empty the dishwasher.
The In-operation indicator light will go
out 10minutes after the end of the pro-
gramme if the door is closed.
If you have deactivated the auto-
matic door opening function (see
“Settings menu, AutoOpen”), but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully.
Otherwise steam from the dish-
washer could damage the edge of
the worktop because the fan is no
longer running.