Instructions

Cleaning and care
59
Cleaning the spray arms
Particles of food can get stuck in the
spray arm jets and bearings. The spray
arms should therefore be checked and
cleaned regularly.
 Switch the dishwasher off.
Remove the spray arms as follows:
 Take out the cutlery tray (if your dish-
washer is fitted with one).
 Push the upper spray arm upwards
to engage the inner ratchet. Then un-
screw the spray arm.
 Push the middle spray arm upwards
 to engage the ratchet. Then un-
screw the spray arm .
 Remove the lower basket.
 Pull the lower spray arm firmly up-
wards to remove it.
 Use a pointed object to push food
particles into the spray arm jets.
 Rinse the spray arms thoroughly un-
der running water.
 Replace the spray arms and check
that they rotate freely.