Instructions

Problem solving guide
60
With the help of the following guide, minor faults in the performance of the ma-
chine, some of which may result from incorrect operation, can be put right without
contacting the Service Department.
The following guide may help you to find the reason for a fault, and to correct it.
You should, however, note the following:
 Repairs must only be carried out by a Miele technician or a Miele authorised
service agent in accordance with local and national safety regulations. Unau-
thorised or incorrect repairs and other work by unqualified persons could be
dangerous.
Technical problems
Problem Cause and remedy
The dishwasher will not
start.
The door is not properly closed.
 Push the door firmly shut.
The dishwasher is not plugged in.
 Insert the plug and switch on at the socket.
The fuse has tripped.
 Reset the trip switch in the mains fuse box or re-
place the fuse in the plug (minimum fuse rating -
see data plate).
The dishwasher is not switched on.
 Switch the dishwasher on with the button.
The dishwasher stops
during a programme
The fuse has tripped.
 Reset the trip switch in the mains fuse box or re-
place the fuse in the plug (minimum fuse rating -
see data plate).
 If the mains fuse trips again, call the Miele Service
Department.
After the programme
has started, the In-op-
eration indicator light is
not visible.
The reflector panel was not correctly fitted.
 Re-fit the reflector panel correctly (see Installation
sheet).