Instructions

Problem solving guide
68
Problem Cause and remedy
White residue is visible
on the dishware. Cloud-
ing occurs on glass-
ware and cutlery; film
can be wiped off.
The rinse aid dosage is set too low.
 Increase the dosage (see “Settings menu, Rinse
aid”).
There is no salt in the salt reservoir.
 Fill the salt reservoir (see “Before using for the first
time - Dishwasher salt”).
The salt reservoir cap has not been screwed on cor-
rectly.
 Replace it, making sure that it screws back on cor-
rectly.
The water softener is programmed to too low a water
hardness level.
 Programme the water softener to a higher water
hardness level (see “Settings menu, Water hard-
ness”).
There are rust stains on
cutlery.
A programme was not run after dishwasher salt was
added. Traces of salt have got into the wash cycle.
 Always run the "Cold pre-wash programme after
refilling salt
The affected items are not corrosion resistant.
 Purchase cutlery which is dishwasher-proof.