Instructions

Settings menu
82
DOS flow rate
A flow rate of 60ml/min is set as stand-
ard. The flow rate can be modified
between 10 and 150ml/min in incre-
ments of 5ml/min.
Set the dosage according to the
cleaning agent manufacturer's re-
commendations.
 Choose the required detergent or
flow rate quantities and confirm your
selection with the OK button.
Vent dispensing system
The dispensing system will not dis-
pense reliably if there is air in the sys-
tem.
The dispensing system must be vented:
– if the dispensing system is being
used for the first time,
– if the liquid detergent reservoir was
not refilled in time and the dispensing
system was emptied,
– if the detergent container was re-
placed.
 To ensure that the dispensing
system functions properly, prior to
venting make sure that the detergent
container is full enough and that the
dispensing lances are firmly attached
to the containers.
 Select Start venting and press the
middle button to confirm.
The venting process will begin. The re-
maining time appears in the display.
The “Pre-wash” programme is offered
directly after the venting process is fin-
ished. Start the programme in order to
dilute and drain any cleaning agent that
escaped into the wash cabinet.
Temperature unit
The temperature can be shown in the
display in degrees Celsius or degrees
Fahrenheit.
 Select the setting you want and con-
firm with OK.
Final rinse temperature
For better drying, the final rinse temper-
ature can be increased for individual
programmes. This function is not avail-
able for all programmes (see “Pro-
gramme chart”).
 Select the setting you want and con-
firm with OK.