Instructions

Settings menu
91
AutoOpen
At the end of programmes with a drying
phase (see “Programme chart”), the
door will open automatically a little in
order to help the drying process.
With the ECO programme (if available)
the door opens during the drying
phase.
This function can be deactivated if you
wish.
 Select the setting you want and con-
firm with OK.
 If you have deactivated the auto-
matic door opening function but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully. Otherwise steam from the dish-
washer could damage the edge of
the worktop because the fan is no
longer running.
Optimise standby
The dishwasher is supplied with the Op-
timise standby function set as standard.
To save energy the dishwasher will
switch off automatically a few minutes
after the last time a button is pressed or
after the end of a programme.
The dishwasher will not switch off in
the event of a fault.
Optimise standby can be switched off if
you prefer. If you do this the duration
before the dishwasher switches off
automatically increases to approx. 6
hours. Doing this will increase energy
consumption.
 Select the setting you want and con-
firm with OK.
BrilliantLight
The dishwasher is fitted with interior
lighting.
When the door is open, the lighting
switches off automatically after 15
minutes.
You can also switch off the interior light-
ing permanently.
 Select the setting you want and con-
firm with OK.
Software version
You can call up the electronic software
version of your dishwasher for technical
support purposes.
 Confirm the display with OK.