Operating instructions

m
Drive motor fault
Motor overheating.
Press the start button to continue.
f
^
Allow the motor to cool down.
y
Power cut
Programme stop
Press the start button.
f
^
The programme can be continued by
pressing the h "Start" button.
§
Heating system fault
Programme stopped. Press the start button.
Programme will run without heating
f
^ To continue the programme without
heating press the h "Start" button.
Call the Service Department.
§
Heating system fault
Call the Service Department
if restart does not work.
f
^
Call the Service Department.
§
Pressure monitor fault
Call the Service Department
if restart does not work
f
^
If the programme still will not start please
call the Service Department.
§
Gas system fault
Call the Service Department
if restart does not work.
f
If this message appears after a programme
has been started:
^
Open the gas tap and then press the "h
Start" button.
If this message appears during a
programme the pressure in the gas supply
has dropped because of other gas heated
appliances operating at the same time.
^
Press the h "Start" button.
^
If the programme still will not start please
call the Service Department.
§
Card fault
Card incorrectly inserted in card reader.
Continue: Press start
f
^ Insert the card the right way round in the
card reader.
Problem solving guide
M.-Nr. 06 533 441 25