Operation Manual

This dryer must only be installed and
commissioned by a Miele authorised technician.
Before using for the first time
Before loading the dryer with laundry, wipe the
internal drum surface with a soft, dry cloth.
Switch the machine on and load the drum.
^
Open all stopcocks for gas and steam as
applicable.
^
Switch on the on-site mains electricity switch.
^
Switch the dryer on by pressing the On/Off K
button in.
Programme chart
–
See the Programme chart later in this booklet for
further details.
Select a programme
Entry menu
1 Cottons
Programme selection ...
2 Minimum iron Settings F ...
3 Delicates
4 Timed drying hot air 10:00
^ Press short cut button D.
Main menu
Cottons Normal
Duration 0:50 h
Low temp.
H
Timer Y
HH
Back A
H
^
By turning the multi-function selector you can then
highlight the following options in the display:
Programme (Cottons) or the drying level (Normal),
and confirm your selection by pressing the
multi-function selector.
Depending on the option highlighted, the
following will be displayed:
– Programme selection
Programme
selection
Back A
Cottons
Minimum iron
Woollens H
Use the multi-function selector to select the
programme you want, and confirm your selection.
The main menu will reappear.
^
Open the drum door.
^
Load the drum.
The pre-sorted laundry should be loaded loosely in
the drum.
Make sure any dispensing aids such as detergent
balls have been removed from the laundry.
Max. load (dry weight of laundry)
PT
8255 8335 8405 8505 8805
Drum volume in litres
250 325 400 500 800
Cottons
10-13 kg 13-16 kg 16-20 kg 20-25 kg 32-40 kg
Minimum iron
5.0 kg 6.6 kg 8.0 kg 10 kg 16 kg
Woollens
4.0 kg 5.2 kg 6.4 kg 8.0 kg 10.8 kg
Delicates
2.0 kg 2.6 kg 3.2 kg 4.0 kg 6.4 kg
Timed drying
10-13 kg 13-16 kg 16-20 kg 20-25 kg 32-40 kg
Do not trap laundry in the door when shutting it.
^ Close the drum door.
The Start button will flash as soon as a programme
can be started.
^
Press the Start button. The Start button will then
light up constantly.
Programme duration/Estimated time left
When a programme is selected, the estimated
duration will appear in the display. Please be aware
that it is only an estimate!
The following factors all affect the estimated time
remaining: residual moisture content after spinning;
type of fabric; size of load; room temperature;
fluctuations in power supply.
The electronics assess conditions in the dryer and
adjust the estimated time remaining for a more
accurate reading. Because of this, the time displayed
can alter during the course of a programme.
Drying
11