Operation Manual

Before the end of a programme
In many programmes the heating phase is followed
by the cooling down phase: Cooling down will
appear in the display. The programme is not finished
until the cooling down phase has been completed.
Do not switch the tumble dryer off before the end
of the drying programme.
Remove the laundry at the end of the programme
Anti-crease (if selected) and Finish will appear in the
display to indicate that the programme has finished.
During the anti-crease phase the drum will continue
to turn at intervals until the laundry is removed. This
helps to prevent laundry creasing.
It is advisable to remove laundry as soon as the
programme has finished.
^
Open the drum door.
^ Remove everything from the drum.
Check that all items have been removed from the
drum. Anything left in the dryer could be damaged
by overdrying when it is next used.
^ Switch the dryer off by pressing the On-Off K
button.
^ Close the drum door.
If no more laundry is to be processed:
^
Switch off the on-site mains switch.
^
Close all stopcocks for gas and steam as
applicable.
Drying
12