Operation Manual

Drying levels
Cottons drying levels
Minimum iron drying levels
Automatic drying levels
The drying levels in the above-named programmes
can be individually altered.
The bar chart shows you the setting.
–
from drier to
–
damper
Factory default: level 4
Drying level Machine iron
The Machine iron drying level can be altered
separately in the Cottons programme.
–
from drier to
–
damper
Factory default: medium
Clean the filter
The filter in the ducting should be cleaned
regularly.
You can decide after how many hours you want the
message Clean out airways / Clean the fluff filter /
Check ducting to appear.
The setting you choose will depend on how much fluff
accumulates and on how often you like to clean the
system.
If you find that the filter is very blocked or, conversely,
has very little fluff in it at the end of the set period of
time, you can choose another setting.
Factory default: 25 hours.
–
Off
–
Time interval of 5 to 55 hours
Display res. moisture
The residual moisture of the drying stage reached
is displayed as a % during the programme
sequence.
Factory default: Do not display %
Delay start
You can set a later start time using the Timer (see
"Timer" in these Operating instructions).
You can decide how this time is displayed.
–
Programme end
The finish time for the programme is selected.
–
Programme start
The start time for the programme is selected.
–
Time until start
The time until the start of the programme is
selected in minutes/hours.
–
Off
(factory default)
When the Timer button is pressed, only the
programme duration, the predicted programme
finish time and the current time of day is displayed
- providing Time not displayed has not been
selected in the Time of day setting.
Settings/Supervisor level menu
27