Operation Manual

Controls
The dryer can be set to operated in "Launderette
mode with WS-short cut keys..."
Operation is simplified with the use of shortcut
buttons D E F G.
People operating the machine cannot then alter the
pre-set programmes.
–
D with short cut keys
(default setting)
–
WS- shortcut keys, basic.
There are 4 programmes in the basic menu.
Compile the 4 programmes first, before you
activate the Laundrette option (see "Saving a
programme as a favourite" in the Operating
instructions).
–
WS - Shortcut keys + Logo
There are 12 programmes which can be selected
using the multi-function selector.
The first three of these are to be found in the basic
menu.
Compile the 12 programmes first, before you
activate the Laundrette option (see Favourites
earlier in the "Settings menu / Supervisor level"
section of this booklet).
– WS- shortcut keys, ex time
4 timed programmes* with different temperature
levels are controlled using an external coinbox.
The running time is set, and this cannot be
changed by the person operating the machine.
–
WS- shortcut keys, int time
4 timed programmes* with different temperature
levels are electronically controlled.
The max. running time is set, and this can be
changed by the person operating the machine.
This option can also be used without a coin box.
* The maximum programme duration is set in the
Service mode.
Caution: If "Launderette mode with WS-shortcut
keys..." has been selected the Settings menu is not
accessible after exiting the Settings/Supervisor
level menu. You cannot then get back into
Supervisor level. If you need to access it please
contact the Miele Service Department.
Logo
The welcome logo "MIELE" or "CUSTOMER'S
LOGO" appears with control options WS-shortcut
keys + Logo, WS-shortcut keys ex/int time.
–
Miele Logo
factory default
–
Customer's Logo
Target groups
Activating target groups by means of multiple
selection.
The target group programmes selected will be added
to the basic programmes. See "Programme chart" in
this booklet.
–
Household
–
Small businesses
–
Bedding
–
Buildings maintenance
–
Fire service
– Professional cleaning
– Equestrian
– Special programmes
^ Only once you have made your selection
, select
Confirm selection and press the multi-function
selector to confirm your choice.
Special programmes
You can create 5 special programmes, which can
either be residual moisture programmes or timed
programmes, and name them.
The 5 special programmes have been
pre-programmed at the factory:
S.prog1-3: Residual moisture programmes
S.prog4-5: Timed drying programmes
–
Final residual moisture level: 0 %
–
Running time of timed programmes: 20 minutes
–
Additional drying time: 0 minutes
–
Temperature (of process (drying) air): 60°C
–
Main drum direction: 300 seconds
–
Reverse drum direction: 300 seconds
Saving your options to memory and creating
individual programmes is described in the next few
pages.
Settings/Supervisor level menu
28