Installation Plan (Steam)

Fittings
(supplied)
Without base
2 × clamps
2 × screws DIN 571 (Ø × length)
1/4'' x 1 9/16'' 6 mm x 40 mm
2 × rawl plugs (Ø × length)
3/8'' x 2'' 10 mm x 50 mm
Machine must be bolted to the floor!
Fixing materials for a floating screed floor are to be provided
on site.
On concrete base
2 × clamps
2 × screws DIN 571 (Ø × length)
1/4'' x 1 9/16'' 6 mm × 40 mm
2 × rawl plugs (Ø × length)
3/8'' x 2'' 10 mm × 50 mm
Fixing materials for a floating screed floor are to be provided
on site.
Machine data
Unit width
47 1/2''
1206 mm
Machine depth
40 1/16''
1018 mm
Unit height
64 9/16''
1640 mm
Casing width
47 1/4''
1200 mm
Casing depth
35 15/16''
913 mm
Minimum width of delivery access to installation site
40 9/16''
1030 mm
Recommended rear wall gap (measured to front of machine) 63''
1600 mm
Min. wall gap (to rear edge of lid)
19 11/16''
500 mm
584 lb
265 kg
2968 N
2968 N
3071 BTU/h
0.9kW
72.2 dB (A)
72.2 dB (A)
Net weight
Dynamic floor load, max.
Average heat dissipation
(dependent on ambient room temperature and program
selected)
Noise level
Sound pressure level
(measured at a distance of 39 3/8'' [1 m] from the
machine and at a height of 63'' [1.6 m])
60 dB (A)
60 dB (A)
Installation should only be carried out by authorized technicians in accordance with national regulations! Follow installation
instructions when installing machine! All rights reserved!
Installation plan: PT 8507 D (Steam Heated)
Date: 2015-06-02
Page: 15