Technical data

The timer can be used to select the time you want the
programme to finish. The start of a programme can be
delayed from 30 minutes up to a maximum of 24 hours,
allowing you to make use of night-time economy electricity
rates, for example.
To open the Timer sub-menu
Cottons Uni. 60°C 1400 rpm
Duration 0:47 h
Extras
H
Timer Y
H
Back A
H
^
Press short cut button E below the word Timer. This
opens the
Timer sub-menu.
To select a delay start time
You can enter the end time for a programme in 30 minute
stages.
Cottons Uni. 60°C 1400 rpm
15:03
Start time:
15:45
Finish:
16:30
^ Use the multi-function selector to select the programme
end time and confirm your selection.
The programme end time will be adjusted to the next full or
half hour. The start of the programme will now be delayed
in parallel with the programme end time you have selected.
To start the timer
^
Press the
Start button.
The delay start time will be shown counting down in minutes.
To cancel the timer
^
Press short cut button G.
The actual load size can only be determined accurately by
the machine once the programme has started. The
programme end time may, therefore, be a bit earlier than
first indicated.
Timer
22