Technical data

Cancelling a programme
You can cancel a programme at any
time after it has started:
^
Press short cut button G
Cancel .
The suds will be pumped away.
^
Open the drum door before starting a
new programme.
Altering a programme
–
After starting a programme you can
change the spin speed at any time
up until the final spin commences
and you can select or deselect the
Starch stop and Rinse hold extras.
– You can change the temperature and
select or deselect the
Intensive
option during the first 5 minutes of a
programme.
Adding or removing laundry
after a programme has started
In some programmes you can add or
remove laundry after the programme
has started:
^
Press the door button a to open the
drum door.
^
Add or remove items.
^
Close the drum door.
The programme will continue
automatically.
Please note:
Once a programme has started the
machine cannot recognise any
adjustment to the load. For this reason,
if laundry is added or removed after the
start of a programme, the machine will
always complete the programme cycle
assuming a full load which can lead to
an increase in the programme duration
shown in the display.
The door cannot be opened, if:
–
the suds temperature is above 55°C.
– the water is above a certain level.
– the programme has reached the
Final spin stage.
If the machine is connected to a
payment system the machine will
lock itself after 3 minutes. You will
then not be able to change or
cancel the programme or to open
the door.
Changing the programme sequence
33