Technical data

What to do if . . .
With the help of the following notes, minor faults in the performance of the
machine, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
,
Repair work to electrical appliances should only be carried out by a
suitably qualified person in strict accordance with current local and national
safety regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.
The programme does not start
Problem Possible cause Remedy
The display remains
dark.
There is no power to
the machine.
Check whether
the electricity supply to the
machine is switched on.
the fuse or circuit breaker
has tripped.
The programme does
not start when Spin has
been selected.
The machine has not
been prepared for
using for the first
time.
Prepare the machine as
described in "Before using for
the first time".
There is a fault
message in the display.
A programme cannot
be started while there
is a fault message in
the display.
Note what is shown in the
display.
Press the function selector.
The display is dark and
the Start button is
flashing slowly.
The display has
switched off
automatically to save
energy (Standby
mode).
Press one of the short cut
buttons. Standby comes to an
end.
Problem solving guide
41