Operating instructions

Peak load cutoff
When activating the peak load cutoff the heat is
turned off and the program is stopped. The display
shows:
1 Hot Wash
Program stop - Peak load function
Program will continue.
i ü f
When the peak load function ends the program will
continue automatically.
Communication module
The communication module makes it possible to
connect the machine to a PC (Personal Computer).
The outlet for the module is on the back of the
machine.
This requires a special Editor Program which is
available from the Miele Professional Department.
Load module
If the machine is equipped with a load module, the
load weight will be displayed, in 0.5 lb increments,
while loading the laundry. The maximum laundry
weight is displayed next to the selected program.
^
Reset with the ->I<-"zero - setting" if the weight
display does not show "00.0" when the drum is
empty.
1 Hot Wash 00.0 / 56 lb
140 °F Main wash
Rinse e
+im k m ->I<- A
If there was still laundry in the drum when the weight
display was reset, the display shows:
1 Hot Wash - -.-
/
56 lb
140 °F Main wash
Rinse e
+im k m ->I<- A
^ Reset again with the ->I<-button.
If the machine is overloaded (wet laundry) the
machine calculates after the programs start with the
nominal value. This value is saved in the operating
data module.
At the end of a program, with the drum stationary, the
residual moisture of the laundry is displayed.
1 Hot Wash
Program end Residual moisture 60 %
Door can be opened.
m FC A
See "Use - Adjust the program" for more information.
Optional modules
25