Installation Plan Washing Machine PW 6068 LP Read all operation and installation instructions prior to assembly, installation, and initial operation to prevent injury and machine damage.
Legend: Connection optional or required for a specific model Connection required AV Drain valve KW Cold water connection AW Waste water connection LP Soap water pump B Appliance fastening PA Equipotential bonding BW Service water connection SLA Peak load connection DOS Dosing unit connection UG Base, closed EL Electrical connection UO Base, open F Adjustable appliance mounts WTV Washer/dryer connection KG Payment device WW Hot water connection KGA Payment device connection
PW 6068 en - US Appliance Dimensions PW 6065 10 441 630 / 02 3
en - US PW 6068 Installation PW 6068 4 10 441 630/ 02
PW 6068 en - US Washer/Dryer Stack PW 6068 10 441 630 / 02 5
en - US PW 6068 Assembly 6 10 441 630/ 02
PW 6068 en - US Assembly 10 441 630 / 02 7
en - US Technical Data PW 6068 Drum volume PW 6068 LP 59 l Filling weight 14.3 lbs (6.5 kg) Loading door, diameter 11 1/8“ (282 mm) Max. spin speed 1400 RPM g-factor 526 Residual moisture (standard load) 49% Electrical connection (EL) Standard voltage (US only) 2 AC 208-240 V Frequency 60 Hz Total connections 4.
PW 6068 Technical Data en - US Max. short-time flow volume PW 6068 LP 7/8“ x 1 3/16“ (22 x 30 mm) 26 l/min Max.
en - US Technical Data PW 6068 PW 6068 LP Installation dimensions Min. clearance appliance to side 13/16“ (20 mm) Recommended clearance appliance to side, washer/dryer stack >11 ¾“ (300 mm) 2‘ 11 7/16“ (900 mm) 3‘ 7 5/16“ (1100 mm) Min. wall clearance from appliance front Recommended min. wall clearance from appliance front Weights and loads Appliance weight (net weight) 234 lbs (106 kg) Max. floor load during operation 2820 N Max. static floor load 1455 N Max.
PW 6068 en - US Installation and planning notes Installation prerequisites The appliance must be connected only to a system designed in accordance with national legislation, regulations and directives, as well as local codes and standards. Hot water connection In addition, all regulations by utilities, accident prevention regulations, insurance guidelines and recognized codes of practice valid at the installation site must be adhered to.
en - US Permanent connection of the drain hose to a sink syphon You may permanently connect the drain hose to a special sink syphon. PW 6068 Alternatively, you can use a wireless multi-station system for maximum 8 terminals with a debit card payment device and additional controllers for terminal monitoring. Serial interface The serial interface is provided with an additional integrated XKM RS323 module. The data interface leading from the XKM RS232 module is compliant with SELV (safety extra-low voltage).