Installation plan Washer PW 6137 EL (Electrically heated) en - US 12.15 M.-Nr.
M.-Nr.
PW 6137 EL (measurements in inches) 3
PW 6137 EL (measurements in inches) 4
PW 6137 EL (measurements in inches) 5
PW 6137 EL (measurements in inches) 6
PW 6137 EL (measurements in millimeters) 7
PW 6137 EL (measurements in millimeters) 8
PW 6137 EL (measurements in millimeters) 9
PW 6137 EL (measurements in millimeters) 10
Technical Datasheet Washer-extractor: Heating: PW 6137 Electric (EL) Legend: Solid circle around symbol: Connection mandatory en - US Broken circle around symbol: Connection optional or as required Optional extras: UG/ UO BS Miele base Concrete base Dispensing pump UO 6013 (UO = Open base) Height Width Depth 5 11/16“ 30 11/16“ 35 3/8“ 144 mm 780 mm 899 mm UG 6013 (UG = closed base) Height Width Depth 5 11/16“ 31 ½“ 35 13/16“ 144 mm 800 mm 909 mm UO 6013-30 (UO = Open base) Height Width Dep
Electrical connection must comply with national regulations. Connection using multi-pole lockable wall socket in compliance with IEC/EN 60309 and IEC/EN 60947 is recommended in order to simplify electrical tests. If machines are hardwired, a multi-pole mains switch must be provided on site. Switches with a contact gap of more than 3 mm can be used. These include switches, fuses and contactors (IEC/EN 60947). A wall socket or mains isolator must be easily accessible after installation.
Cold water Liquid dispensing (Option) Waste water Drain valve Min. water pressure/flow pressure Max. water pressure/flow pressure Max. throughput 14.5 psi 145 psi 1.5 gal/min 100 kPa 1000 kPa 5.5 l/min 1 inlet hose with ¾" threaded union included (optional). On-site connection thread Inch Length of inlet hose 59 1/16“ ¾" garden hose thread, male 1500 mm Max. waste water temperature Waste water connection on machine (ext. diameter) Drain connection on site (int. diameter) Max.