Installation plan
PWM 908 en-US
= standard, = optional, + = only on request, - not available
8 11 282 580/03
Technical data
PWM 908 DV
PWM 908 DP
Drum volume
gal (l)
19.3 (73)
19.3 (73)
Capacity
lb (kg)
17.6 (8.0)
17.6 (8.0)
Door opening diameter
inch (mm)
11 13/16" (300)
11 13/16" (300)
Max. spin speed
rpm
1,500
1,500
g-factor
613
613
Residual moisture (standard load according to DIN 60456)
%
48
48
Electrical connection (EL)
Standard voltage for CDN & USA
-
2 AC 208-240 V
Frequency
Hz
-
60
Total rated load
kW
-
4.0 – 5.2
Fuse rating
A
-
2 x 30
Power cord min. cross-section
-
3 x AWG10
Wire with plug NEMA L6-30
-
Wire length
inch (mm)
-
78 3/4" 2000
Non-standard voltage MAR 208-240 (Marine)
-
2 AC 208-240 V
Frequency
Hz
-
60
Total rated load
kW
-
4.0 – 5.2
Fuse rating
A
-
2 x 30
Power cord min. cross-section
-
3 x AWG10
Wire with plug NEMA L6-30
-
Wire length
inch (mm)
-
78 3/4" (2,000)
Cold water (KW)
Permissible water flow pressure
PSI (kPa)
1.45 – 14.5 (100 – 1,000)
1.45 – 14.5 (100 – 1,000)
Required flow rate (cold water connection only)
gal/min (l/min)
2.9 (11)
2.9 (11)
Required flow rate (with additional hot water connection)
gal/min (l/min)
2.6 (10)
2.6 (10)
Average water consumption (60°C standard programme)
gal/h (l/h)
10.5 (40)
10.5 (40)
Connection to be provided on site, external thread according to DIN 44991 (flat seal)
Inches
¾"
¾"
Connection hose ½" with ¾" threaded union
Connection hose length
inch (mm)
61 (1,550)
61 (1,550)
Hot water (WW)
Max. water intake temperature
°F (°C)
158 (70)
158 (70)
Permissible water flow pressure
PSI (kPa)
1.45 – 14.5 (100 – 1,000)
1.45 – 14.5 (100 – 1,000)
Required flow rate
gal/min (l/min)
2.9 (11)
2.9 (11)
Average water consumption (60°C standard programme)
gal/h (l/h)
3.4 (13)
3.4 (13)
Connection to be provided on site, external thread according to DIN 44991 (flat seal)
Inches
¾"
¾"
Connection hose ½" with ¾" threaded union
Connection hose length
inch (mm)
61 (1,550)
61 (1,550)
Drain valve (DV)
Connector (ext. diameter)
inch (mm)
3 (75) /DN70
-
Max. drainage temperature
°F (°C)
194 (90)
Max. transient flow rate
gal/min (l/min)
16 (62)
-
Drain pump (DP)
Hose connection (external diameter)
inch (mm)
-
7/8 (22) /DN22
Max. drainage temperature
°F (°C)
-
194 (90)
On-site hose sleeve (int. diameter x length)
inch (mm)
-
22 x 30
Max. transient flow rate
gal/min (l/min)
-
6.8 (26)
Max. delivery head (from lower edge of machine)
inch (mm)
-
39 3/8" (1000)
Drain hose DN 22 with connector (supplied as standard)
-
Connection hose length
inch (mm)
-
59 1/16" (1500)
Potential equalization (PA)
Machine connection (separate kit required)
XCI box LG interface