Operating instructions/Installation instructions

Initial commissioning
20
Setting up a payment system
If you wish to set up a payment system,
read the “Payment system” section of
the “Supervisor level” chapter.
These settings can only be changed
during the initial commissioning
process. If you wish to change the set-
tings after the commissioning process,
please contact Miele Technical Service.
If you do not wish to set up a payment
system, you can skip this stage.
11:02
No payment
system
Payment system
OK
Program
control
Timed
operation
KOM module
 Touch the No payment systemsensor
control.
The display will change to the next set-
ting.
Selecting pre-wash water
11:02
Cold
Pre-wash
OK
Hot
 Touch the coldsensor control if the
washing machine is only connected
to a cold water supply, or touch hotif
the washing machine is connected to
cold and hot water.
The display will change to the next set-
ting.
Selecting main wash water
11:02
Cold
Main wash
OK
Hot
 Touch the coldsensor control if the
washing machine is only connected
to a cold water supply, or touch hotif
the washing machine is connected to
cold and hot water.
Further information will appear on the
display.