Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the washing machine
- Initial commissioning
- Emptying the drum
- Switching on the washing machine
- Setting the display language
- Reference to external appliances
- Setting the display brightness
- Setting the date
- Confirming the time request
- Setting the time
- Selecting program packages
- Setting up a payment system
- Selecting pre-wash water
- Selecting main wash water
- Removing the shipping struts
- Completing the commissioning process
- 1. Preparing the laundry
- 2. Loading the washing machine
- 3. Selecting a program
- 4. Selecting program settings
- 5. Adding detergent
- 6. Starting a program – end of a program
- Timer
- Program chart
- Extra options
- Special features in the program sequence
- Changing the program sequence
- Cleaning and care
- Frequently asked questions
- Technical Service
- MIELE
- Installation and connection
- Technical data
- Supervisor level
Initial commissioning
21
Removing the shipping struts
The display will remind you to remove
the shipping struts.
Risk of damage due to failure to
remove the shipping struts.
Failure to remove the shipping struts
can result in damage to the washing
machine and to adjacent cabinetry or
appliances.
Remove the shipping struts as de-
scribed in “Installation and connec-
tion”.
Confirm that the shipping struts have
been removed with the OKsensor
control.
Continue setting up as described in the Op-
erating instructionsappears in the display.
Confirm the message with the
OKsensor control.
Completing the commissioning
process
To complete the commissioning
process, the Normal program must be
run without laundry and without deter-
gent.
If the power is interrupted prior to the
start of the first wash program (e.g., if
the machine is switched off with the
sensor control), the initial commis-
sioning process can be completed
again.
Once a wash program has been run-
ning for over 20minutes, the initial
commissioning process does not have
to be performed again.
Turn on the faucets.
Touch the Programssensor control.
11:02
Whites
Minimum Iron
ExpressNormal
Delicates
Programs
Cottons Plus
Touch the Cottons Plussensor control.
11:02
60 °C 1500
1:07
Normal
h
Overview
Temperature Spin speed
Extras
not selected
Timer
CapDosing
rpm
not selected
Touch the Start/Stopsensor control.
When the program has finished, your
machine is ready for use.
If you have activated disinfection
programs, you must complete the
Thermal disinfectionprogram as the
first program; make sure you use a
suitable detergent but do not load
the machine.