Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the washing machine
- Initial commissioning
- Emptying the drum
- Switching on the washing machine
- Setting the display language
- Reference to external appliances
- Setting the display brightness
- Setting the date
- Confirming the time request
- Setting the time
- Selecting program packages
- Setting up a payment system
- Selecting pre-wash water
- Selecting main wash water
- Removing the shipping struts
- Completing the commissioning process
- 1. Preparing the laundry
- 2. Loading the washing machine
- 3. Selecting a program
- 4. Selecting program settings
- 5. Adding detergent
- 6. Starting a program – end of a program
- Timer
- Program chart
- Extra options
- Special features in the program sequence
- Changing the program sequence
- Cleaning and care
- Frequently asked questions
- Technical Service
- MIELE
- Installation and connection
- Technical data
- Supervisor level
Frequently asked questions
57
A fault message appears in the display
1
Problem Possible cause and solution
Container empty
One of the external detergent containers is empty.
Refill the detergent container.
Hygiene info: run the
Maintenance hy-
giene program, or a
program of at least
60°C
During the last wash, a wash program with a temper-
ature below 140°F (60°C) or the Drain/Spinprogram
was selected.
Start a program with a minimum temperature of
140°F (60°C) or the Maintenance Wash Hygienepro-
gram.
Check hot water in-
take
The hot water supply is blocked or restricted.
Check whether the hot water supply has been
turned on properly.
Check whether the intake hose is kinked.
Align the machine.
Laundry not properly
spun
The selected spin speed was not reached during the
final spin due to excessive imbalance.
Check that the washing machine is level.
Start the spin cycle again.
Machine is leaking
The washing machine or drain valve is leaking.
Turn off the water supply.
Contact Technical Service.
1
The messages will appear at the end of the program and when the washing ma-
chine is switched on and needs to be confirmed with the OKsensor control.