Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the washing machine
- Initial commissioning
- Emptying the drum
- Switching on the washing machine
- Setting the display language
- Reference to external appliances
- Setting the display brightness
- Setting the date
- Confirming the time request
- Setting the time
- Selecting program packages
- Setting up a payment system
- Selecting pre-wash water
- Selecting main wash water
- Removing the shipping struts
- Completing the commissioning process
- 1. Preparing the laundry
- 2. Loading the washing machine
- 3. Selecting a program
- 4. Selecting program settings
- 5. Adding detergent
- 6. Starting a program – end of a program
- Timer
- Program chart
- Extra options
- Special features in the program sequence
- Changing the program sequence
- Cleaning and care
- Frequently asked questions
- Technical Service
- MIELE
- Installation and connection
- Technical data
- Supervisor level
Frequently asked questions
61
The door will not open
Problem Possible cause and solution
The door cannot be
pulled open during a
program.
The door is locked during the wash program.
Touch the Start/Stopsensor control.
Select Cancel programor Add laundry.
The door will unlock and you will be able to pull it
open.
There is still water in the drum and the machine is un-
able to drain.
Clean the drainage system as described under
“Opening the door in the event of a blocked drain
outlet and/or power outage”.
At the end of a program
or when a program is
canceled, the following
appears in the display:
Cooling downorComfort
cooling
.
To protect the user against scalding, the door cannot
be opened if the suds temperature is higher than
130°F (55°C).
Wait until the temperature in the drum has de-
creased and the message has gone out in the dis-
play.
The following appears
in the display:
The door lock is jammed.
Contact Service.
The door lock has jammed.
Contact Technical Service.