Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the washing machine
- Initial commissioning
- Emptying the drum
- Switching on the washing machine
- Setting the display language
- Reference to external appliances
- Setting the display brightness
- Setting the date
- Confirming the time request
- Setting the time
- Selecting program packages
- Setting up a payment system
- Selecting pre-wash water
- Selecting main wash water
- Removing the shipping struts
- Completing the commissioning process
- 1. Preparing the laundry
- 2. Loading the washing machine
- 3. Selecting a program
- 4. Selecting program settings
- 5. Adding detergent
- 6. Starting a program – end of a program
- Timer
- Program chart
- Extra options
- Special features in the program sequence
- Changing the program sequence
- Cleaning and care
- Frequently asked questions
- Technical Service
- MIELE
- Installation and connection
- Technical data
- Supervisor level
Supervisor level
86
Special programs
You can put together 5 special pro-
grams and save them as your own
wash programs with your own pro-
gram names.
You must have already activated Spe-
cial programs under Program packages.
Enter the name of your special program
and its basic settings into the “Special
programs” table under the “Program
chart”.
- Temperature: You can select a tem-
perature in multiple increments from
cold to 194°F (90°C).
- Wash block: You can select one or
more wash blocks.
- Spin speed: You can select a spin
speed in increments from 600rpm to
1,400rpm.
Sort programs
Programs can be moved within the
program list and in the Favorites list.
Factory default: Off
Moving programs
Touch the sensor control for the pro-
gram you want to move.
Press and hold the sensor control un-
til the frame changes.
Drag the program to the required
place.
Program color allocation
You can assign a color to a Favorite
program. In the list of Favorites, each
Favorite program is given a colored
frame, which can be adjusted.
Factory default: On
Hygiene
The Maintenance Wash Hygiene pro-
gram is shown in the list of special
programs.
If a program at a temperature below
140°F (60°C) has been used, a request
to start the Maintenance Wash Hygiene
program appears in the display.
Factory default: Off
Expert code
A code has to be entered to cancel a
disinfection program. The code can be
modified.
The code is: 000
Make a note of your new code if you
ever change it.