Operating instructions/Installation instructions

Supervisor level
96
Feedback sig. to pay system
Setting the feedback signal for the
coin box.
- Factory default: Off
- End of program
The feedback signal is sent at the
end of the program.
- Release of the start button
The feedback signal is sent when the
start button is released.
- Start and end of program
The feedback signal is sent at the
start and end of the program.
- Program running
The feedback signal is sent con-
stantly between the start and end of
the program.
Clear paid signal
The “Paid” signal in coin-box mode
can be applied until the end of the
program or discarded if the program is
not started after 5minutes.
Factory default: Off
Payment system lock
To avoid tampering, a program lock
can be set up in program operation. If
the lock is applied, the program is in-
terrupted and payment credit is lost as
soon as the door is opened.
The time for the lock can be adjusted to
prevent laundry being added.
- Off
- As soon as the program starts
- 1minute after the start of the pro-
gram
- 2minutes after the start of the pro-
gram
- 3minutes after the start of the pro-
gram (factory default)
- 4minutes after the start of the pro-
gram
- 5minutes after the start of the pro-
gram
FOC programs
In coin-box mode, you can decide
whether the Drain/Spin program can be
used for free.
Factory default: Off