Operating instructions/Installation instructions

Initial commissioning
18
Reference to external appli-
ances
A reference to external hardware ap-
pears.
 Confirm with the OKsensor control.
Before initial commissioning, connect
the XCI box or slide a communication
module into the slot on the back of the
washing machine. The washing ma-
chine must be disconnected from the
power supply. Then start the commis-
sioning process.
Setting the display brightness
You will be asked to select the bright-
ness of the display.
Display brightness
Darker
Brighter
OK
 Touch the segment bars until you
reach the required level of brightness.
The selected brightness level will be
highlighted in orange.
 Confirm with OK.
The display will change to the next set-
ting.
Setting the date
OK
Date
2021
2020
2019
25
24
22
21
23July
August
September
June
May
2018
2017
 Place your finger on the value that
you want to change and move your
finger in the direction you want.
 Once all values have been selected,
confirm with the OKsensor control.
The display will change to the next set-
ting.
Confirming the time request
The following question appears in the
display:
Remove the clock display?
 Touch the Yes or Nosensor control.
If you select Yes, the system will skip
the Clock displaysetting.
If you select No, the display will switch
to the Clock displaysetting.