Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the washing machine
- Initial commissioning
- Emptying the drum
- Switching on the washing machine
- Setting the display language
- Reference to external appliances
- Setting the display brightness
- Setting the date
- Confirming the time request
- Setting the time
- Selecting program packages
- Setting up a payment system
- Selecting pre-wash water
- Selecting main wash water
- Removing the shipping struts
- Completing the commissioning process
- 1. Preparing the laundry
- 2. Loading the washing machine
- 3. Selecting a program
- 4. Selecting program settings
- 5. Adding detergent
- 6. Starting a program – end of a program
- Timer
- Program chart
- Extra options
- Special features in the program sequence
- Changing the program sequence
- Cleaning and care
- Frequently asked questions
- Technical Service
- MIELE
- Installation and connection
- Technical data
- Supervisor level
Frequently asked questions
55
You are able to correct the majority of faults and problems that arise during day-to-
day use without external assistance. You can save time and money in many cases,
as you do not need to contact Miele Technical Service.
The following tables are designed to help you to find the cause of a malfunction or
a fault and to resolve it.
The wash program will not start.
Problem Possible cause and solution
The display remains
dark, and the Start/
Stopsensor control
does not light up or
flash.
There is no power to the machine.
Check whether the washing machine is switched
on.
Check whether the washing machine is connected
to the power supply.
Check whether the circuit breaker has tripped.
The washing machine has switched off automatically
to save energy.
Switch the washing machine back on with the
button.
The following appears
in the display:
Door will not lock. Contact
Service..
The door is not closed properly. The door lock could
not engage.
Close the door again.
Start the program again.
If the fault message appears again, contact Tech-
nical Service.
The program does not
start when Spin has
been selected.
You have not yet completed the initial commissioning
process.
Perform the Initial commissioning process as de-
scribed in these instructions.
The display is dark and
the Start/Stopsensor
control is flashing
slowly.
The display has switched off automatically to save
energy.
Touch any of the controls. The display switches
back on.