Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the washing machine
- Initial commissioning
- Emptying the drum
- Switching on the washing machine
- Setting the display language
- Reference to external appliances
- Setting the display brightness
- Setting the date
- Confirming the time request
- Setting the time
- Selecting program packages
- Setting up a payment system
- Selecting pre-wash water
- Selecting main wash water
- Removing the shipping struts
- Completing the commissioning process
- 1. Preparing the laundry
- 2. Loading the washing machine
- 3. Selecting a program
- 4. Selecting program settings
- 5. Adding detergent
- 6. Starting a program – end of a program
- Timer
- Program chart
- Extra options
- Special features in the program sequence
- Changing the program sequence
- Cleaning and care
- Frequently asked questions
- Technical Service
- MIELE
- Installation and connection
- Technical data
- Supervisor level
Supervisor level
83
Operation/display
Language
The display can be set to appear in
one of several different languages. To
select the permanent supervisor lan-
guage you want, go to the Languages
sub-menu.
When a program is running, you can
change the user language using the
sensor.
Language menu
The display can be set to one of sev-
eral different user languages. This set-
ting allows you to determine how lan-
guages can be selected.
International
6 languages are available. The
sensor control is not active. Note
the settingSet languages.
Language setting
The sensor control can be used
to select a language. All languages are
available (factory default).
You can change the order of the first 4
languages. These slots are allocated to
the most commonly used languages.
Standard language
The user language cannot be changed.
The user language is the same as the
supervisor language. The sensor
control is not active.
Set languages
The languages for the setting Language
entry International can be changed.
32 languages are available. 6 languages
can be selected to appear in the lan-
guage menu display at one time.
If you wish to add a new language to
the language menu:
First select the language you want to
replace.
All available languages are displayed.
Select and confirm the language to
replace the previous language.
The new language appears instead of
the old one.
Display brightness
The brightness of the display can be
altered. The setting depends on the
various lighting conditions in the place
of installation.
It can be set to one of 10 different lev-
els.