Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the washing machine
- Initial commissioning
- Emptying the drum
- Switching on the washing machine
- Setting the display language
- Reference to external appliances
- Setting the display brightness
- Setting the date
- Confirming the time request
- Setting the time
- Selecting program packages
- Setting up a payment system
- Selecting pre-wash water
- Selecting main wash water
- Removing the shipping struts
- Completing the commissioning process
- 1. Preparing the laundry
- 2. Loading the washing machine
- 3. Selecting a program
- 4. Selecting program settings
- 5. Adding detergent
- 6. Starting a program – end of a program
- Timer
- Program chart
- Extra options
- Special features in the program sequence
- Changing the program sequence
- Cleaning and care
- Frequently asked questions
- Technical Service
- MIELE
- Installation and connection
- Technical data
- Supervisor level
Supervisor level
85
Display off status
The display switches off to save en-
ergy. The Start/Stopsensor control
flashes slowly.
Changing this setting leads to increased
energy consumption.
Off
The display does not switch off.
On (10 min.) Not curr.prog.
The display will remain on while the pro-
gram is running but will go out 10min-
utes after the end of the program.
Logo (10 min.) Not curr.prog.
The display stays switched on while the
program is running. The logo lights up
10minutes after the end of the pro-
gram.
On after 10 min.
The display will go out after 10minutes.
On (30 min.) Not curr.prog.
The display will remain on while the pro-
gram is running but will go out 30min-
utes after the end of the program.
Logo (30 min.) Not curr.prog.
The display stays switched on while the
program is running. The logo lights up
30minutes after the end of the pro-
gram.
On after 30 min.
The display will go out after 30minutes.
Machine off status
In order to save energy, the washing
machine will switch off automatically
after the end of the program or if no
further selection is made. You can
change this setting.
Changing this setting leads to increased
energy consumption.
- No switch off
- Switch off after 15minutes (factory
default)
- Switch off after 20minutes
- Switch off after 30minutes
Delay start
The delay start (timer) display can be
switched on or off.
Factory default: On
Memory
The washing machine will save the
settings (temperature, spin speed, and
some of the options) which have been
selected for a program after the pro-
gram has started.
When the program is chosen again, the
saved settings will appear on the dis-
play.
Factory default: Off