Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the washing machine
- Initial commissioning
- Emptying the drum
- Switching on the washing machine
- Setting the display language
- Reference to external appliances
- Setting the display brightness
- Setting the date
- Confirming the time request
- Setting the time
- Selecting program packages
- Setting up a payment system
- Selecting pre-wash water
- Selecting main wash water
- Removing the shipping struts
- Completing the commissioning process
- 1. Preparing the laundry
- 2. Loading the washing machine
- 3. Selecting a program
- 4. Selecting program settings
- 5. Adding detergent
- 6. Starting a program – end of a program
- Timer
- Program chart
- Extra options
- Special features in the program sequence
- Changing the program sequence
- Cleaning and care
- Frequently asked questions
- Technical Service
- MIELE
- Installation and connection
- Technical data
- Supervisor level
Supervisor level
97
Low water pressure
If the water pressure is below 100kPa
(1bar), the program will be canceled
and the fault messageCheck water in-
take will appear.
If the on-site water pressure cannot be
increased, activating the settingLow wa-
ter pressure will prevent the program
from being canceled.
Factory default: No
Automatic dispensing
Automatic dispensing via an external
dispensing system can be activated
Factory default: Off
CapDosing
You can choose whether CapDosing is
displayed in the program settings.
Factory default: On
Legal Information
Open Source Licenses
You can view information here.
Copyrights and licenses for operator
and control software
Miele uses their own and third party
software which is not subject to any so-
called open source license for the oper-
ation and control of the machine. This
software/these software components
are protected by copyright. The copy-
right powers of Miele and third parties
have to be respected.
Furthermore, this machine contains
software components which are distrib-
uted under open source license condi-
tions. Please refer to the menu item Set-
tings| Machine parameters| Legal informa-
tion| Open source licenses in the machine
for the Open Source components con-
tained therein, together with the corre-
sponding copyright notices, copies of
the licensing conditions valid at the
time, and any further information. The li-
ability and warranty provisions of the
open source licensing conditions as
stated therein apply only in relation to
the respective rights holders.