Installation plan

PWM 908 en-CA
 = standard,  = optional, + = only on request, - not available
8 11 285 360/04
Technical data
PWM 908 DV
PWM 908 DP
Drum volume
l
73 (2.58 ft3)
73 (2.58 ft3)
Capacity
kg
8.0 (17.6 lb)
8.0 (17.6 lb)
Door opening diameter
mm
300 (11 13/16 in)
300 (11 13/16 in)
Max. spin speed
rpm
1,500
1,500
g factor
613
613
Residual moisture (standard load according to DIN 60456)
%
48
48
Electrical connection (EL)
Standard voltage (CDN & USA only)
-
2 AC 208-240 V
Frequency
Hz
-
60
Total rated load
kW
-
4.0 – 5.2
Fuse rating
A
-
2 x 30
Supply cable min. cross-section
-
3 x AWG10
Supply cable with plug type NEMA L6-30
-

Length of supply cable
mm
-
2,000 (6.5 ft)
Non-standard voltage MAR 208-240 (Marine)
-
2 AC 208-240 V
Frequency
Hz
-
60
Total rated load
kW
-
4.0 – 5.2
Fuse rating
A
-
2 x 30
Supply cable min. cross-section
-
3 x AWG10
Supply cable with plug type NEMA L6-30
-

Length of supply cable
mm
-
2,000
Cold water (KW)
Permissible water flow pressure
kPa
100 – 1,000
(14.5 – 145 psi)
100 – 1,000
(14.5 – 145 psi)
Required flow rate (cold water connection only)
l/min
11 (2.9 gal/min)
11 (2.9 gal/min)
Required flow rate (with additional hot water connection)
l/min
10 (2.6 gal/min)
10 (2.6 gal/min)
Average water consumption (60°C standard program)
l/h
40 (10.6 gal)
40 (10.6 gal)
Connection to be provided on site, external thread according to DIN 44991 (flat seal)
Inches
¾" Male Garden
Hose Thread
¾" Male Garden
Hose Thread
Connection hose ½" with ¾" threaded union


Connection hose length
mm
1,550 (5 ft)
1,550 (5 ft)
Hot water (WW)
Max. water intake temperature
°C
70 (158°F)
70 (158°F)
Permissible water flow pressure
kPa
100 – 1,000
(14.5 – 145 psi)
100 – 1,000
(14.5 – 145 psi)
Required flow rate
l/min
11 (2.9 gal/min)
11 (2.9 gal/min)
Average water consumption (60°C standard program)
l/h
13 (3.4 gal/h)
13 (3.4 gal/h)
Connection to be provided on site, external thread according to DIN 44991 (flat seal)
Inches
¾" Male Garden
Hose Thread
¾" Male Garden
Hose Thread
Connection hose ½" with ¾" threaded union


Connection hose length
mm
1,550 (5 ft)
1,550 (5 ft)
Drain valve (DV)
Connection (ext. diameter)
mm
75 (DN70)
-
Max. drainage temperature
°C
90 (195°F)
Max. transient flow rate
l/min
62 (16.3 gal/min)
-
Drain pump (DP)
Hose connection (external diameter)
mm
-
22 (DN22)
Max. drainage temperature
°C
-
90 (195°F)
On-site hose sleeve (int. diameter x length)
mm
-
22 x 30
(7/8 x 1 3/16 in)
Max. transient flow rate
l/min
-
26 (6.8 gal/min)
Max. delivery head (from lower edge of machine)
mm
-
1,000 (3.3 ft)
Drain hose DN 22 with connector (supplied as standard)
-

Connection hose length
mm
-
1,500 (5 ft)
Potential equalization (PA)
Machine connection (separate kit required)

