Operating instructions/Installation instructions
Supervisor level
86
Process technology
Anti-crease
The Anti-crease function helps prevent
creasing after the end of the program.
At the end of the program, the drum
continues to turn for up to 30minutes.
The door can be opened at any time
during the Anti-crease phase.
Factory default: On
Water level Min. iron
You can increase the water level for
the main wash in the Minimum
ironprogram.
– + 0mmwc (factory default)
– + 10mmwc
– + 20mmwc
– + 30mmwc
Water level Cottons
You can increase the water level for
the main wash in the Cottonspro-
gram.
– + 0mmwc (factory default)
– + 10mmwc
– + 20mmwc
– + 30mmwc
Pre-wash temp Cottons
You can select the temperature for the
pre-wash in the Cottonsprogram.
– 86°F (30°C) (factory default)
– 95°F (35°C)
– 104°F (40°C)
– 113°F (45°C)
Wash time
Cottons pre-wash
You can increase the duration for the
pre-wash in the Cottonsprogram.
– + 0min (factory default)
– + 6min
– + 9min
– + 12min
Cottons
You can increase the duration for the
main wash in the Cottonsprogram.
– + 0min (factory default)
– + 10min
– + 20min
– + 30min
– + 40min