Installation Plan Washing Machine PWM 908 DV/DP Always read the operating and installation instructions before setting up, installing, and commissioning the machine. This prevents both personal injury and damage to the machine.
Please have the model and serial number of your machine available when contacting Technical Service. U.S.A. Miele, Inc. National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-991-9380 Fax: 609-419-4241 www.miele-pro.com proinfo@mieleusa.com Technical Service & Support Phone: 800-991-9380 Fax: 800-220-1348 proservice@mieleusa.
PWM 908 en-US Machine dimensions 11 282 580/03 3
PWM 908 en-US Installation 4 11 282 580/03
PWM 908 en-US Washer-dryer stack 11 282 580/03 5
PWM 908 en-US Installation B B B B BS 145,5 148 305 148 681 1031 305 1031 145,5 B B B B BS 145,5 6 305 145,5 148 305 148 11 282 580/03
PWM 908 en-US Installation 11 282 580/03 7
PWM 908 en-US Technical data Drum volume gal (l) PWM 908 DV 19.3 (73) PWM 908 DP 19.3 (73) Capacity lb (kg) 17.6 (8.0) 17.6 (8.0) Door opening diameter inch (mm) 11 13/16" (300) 11 13/16" (300) Max. spin speed rpm 1,500 1,500 613 613 48 48 g-factor Residual moisture (standard load according to DIN 60456) % Electrical connection (EL) Standard voltage for CDN & USA - 2 AC 208-240 V Frequency Hz - 60 Total rated load kW - 4.0 – 5.2 Fuse rating A - 2 x 30 Power cord min.
PWM 908 en-US Technical data PWM 908 DV PWM 908 DP 6 6 Peak load/energ y management (SLA) Machine connection (with XCI box LG) P a ym e n t s ys t e m c o n n e c t i o n ( K G A ) Connection of payment systems (with XCI box LG) Communication module (XKM) Communication module XKM 3200 WL PLT Liquid dispensing (DOS) Connection for liquid dispensing agents Max. no. of dispenser pumps No. XCI box LG interface Installation on machine feet (F) No.
PWM 908 en-US Installation and planning notes Installation requirements Cold water connection The machine should only be connected to a power supply provided in accordance with all appropriate local and national legislation and regulations. The washing machine should be connected to a domestic water supply in accordance with current local and national safety regulations.
PWM 908 en-US Connecting the drain hose to a sink drain outlet Interface The drain hose can be connected securely to a suitable sink drain outlet. The machine can be retrofitted with an XKM 3200 WL PLT communication module. This module can be used as a WiFi or LAN interface. The LAN interface provided via the module complies with SELV (Safety Extra Low Voltage) in accordance with EN 60950. Connected appliances must also comply with SELV.
