Operating and Installation Instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the washing machine
- Initial commissioning
- Emptying the drum
- Switching on the washing machine
- Setting the display language
- Reference to external appliances
- Setting the display brightness
- Setting the date
- Confirming the time request
- Setting the time
- Selecting program packages
- Setting up a payment system
- Selecting pre-wash water
- Selecting main wash water
- Removing the shipping struts
- Completing the commissioning process
- 1. Preparing the laundry
- 2. Loading the washing machine
- 3. Selecting a program
- 4. Selecting program settings
- 5. Adding detergent
- 6. Starting a program – end of a program
- Timer
- Program chart
- Extra options
- Special features in the program sequence
- Changing the program sequence
- Cleaning and care
- Frequently asked questions
- Technical Service
- MIELE
- Installation and connection
- Front view
- Rear view
- Installation locations
- Installation notes
- Transporting the washing machine to its installation site
- Installation surface
- Removing the shipping struts
- Re-installing the shipping struts
- Leveling the washing machine
- External control equipment
- Water connection
- Water drainage
- Electrical connection
- Technical data
- Supervisor level
Supervisor level
95
Feedback sig. to pay system
Setting the feedback signal for the
coin box.
– Factory default: Off
– End of program
The feedback signal is sent at the
end of the program.
– Release of the start button
The feedback signal is sent when the
start button is released.
– Start and end of program
The feedback signal is sent at the
start and end of the program.
– Program running
The feedback signal is sent con-
stantly between the start and end of
the program.
Clear paid signal
The “Paid” signal in coin-box mode
can be applied until the end of the
program or discarded if the program is
not started after 5minutes.
Factory default: Off
Payment system lock
To avoid tampering, a program lock
can be set up in program operation. If
the lock is applied, the program is in-
terrupted and payment credit is lost as
soon as the door is opened.
The time for the lock can be adjusted to
prevent laundry being added.
– Off
– As soon as the program starts
– 1minute after the start of the pro-
gram
– 2minutes after the start of the pro-
gram
– 3minutes after the start of the pro-
gram (factory default)
– 4minutes after the start of the pro-
gram
– 5minutes after the start of the pro-
gram
FOC programs
In coin-box mode, you can decide
whether the Drain/Spin program can be
used for free.
Factory default: Off