Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the washing machine
- Initial commissioning
- Emptying the drum
- Switching on the washing machine
- Setting the display language
- Reference to external appliances
- Setting the display brightness
- Setting the date
- Confirming the time request
- Setting the time
- Selecting program packages
- Setting up a payment system
- Selecting pre-wash water
- Selecting main wash water
- Removing the shipping struts
- Completing the commissioning process
- 1. Preparing the laundry
- 2. Loading the washing machine
- 3. Selecting a program
- 4. Selecting program settings
- 5. Adding detergent
- 6. Starting a program – end of a program
- Timer
- Program chart
- Extra options
- Special features in the program sequence
- Changing the program sequence
- Cleaning and care
- Frequently asked questions
- Technical Service
- MIELE
- Installation and connection
- Technical data
- Supervisor level
5. Adding detergent
29
Close the lid and press it firmly shut.
Close the detergent dispenser
drawer.
The cap is opened by the act of in-
serting it in the detergent dispenser
drawer. The contents can run out of
the cap if you then remove it from
the drawer before it is used.
Dispose of opened caps.
The wash program will dispense the
contents of the cap at the correct time.
When using CapDosing, water intake
to the compartment takes place
solely via the cap.
When using caps, do not add extra
fabric softener to the compart-
ment.
Remove the empty cap at the end of
the program.
For technical reasons, a small amount
of water will remain in the cap.
Deactivating or changing CapDosing
CapDosing can only be deactivated or
changed prior to the program start.
Touch the CapDosingsensor control
and disable the selected cap option.
External dispensing
The washing machine is pre-equipped
for connecting to external detergent
dispensing systems. A separate conver-
sion kit for external dispensing systems
is required. This must be installed by
Miele Technical Service or by a Miele
Service dealer.