Operating and Installation Instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the tumble dryer
- Initial commissioning
- 1. Notes on correct laundry care
- 2. Loading the tumble dryer
- 3. Selecting a program
- 4. Selecting program settings
- 5. Starting a program
- 6. End of program – removing the laundry
- Timer
- Program chart
- Changing the program sequence
- Fragrance flacon
- Cleaning and care
- Frequently Asked Questions
- Technical Service
- MIELE
- IMPORTANT SAFETY INSTRUCTIONS
- Installation and connection
- Technical data
- Supervisor level
Cleaning and care
49
Observing the cleaning
intervals
This tumble dryer is equipped with a
multi-stage filter system, which
consists of lint filters (1.) and a filter in
the toe-kick (2.).
This filter system collects all lint
generated during the drying process.
Failure to clean the filter regularly could
increase drying times.
Fire hazard due to irregular
maintenance.
Too many lint deposits in the filter
system and tumble dryer will result in
a risk of fire.
Check the filter system and air-
supply area on a regular basis. Clean
the filter if you find any lint deposits.
Damage caused by a missing or
damaged filter system.
Too many lint deposits in the filter
system and tumble dryer will result in
a risk of appliance malfunctions and
a risk of fire.
Never use the tumble dryer without
the filter system. Always replace a
damaged filter system immediately.
1. When to clean the lint filter
The lint filters are located in the drum-
loading area.
Clean the filters after every program
and always clean them when the
following prompt appears in the
display: Clean out the airways.
To delete the message: Touch the
OKsensor control.