Operating and Installation Instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the tumble dryer
- Initial commissioning
- 1. Notes on correct laundry care
- 2. Loading the tumble dryer
- 3. Selecting a program
- 4. Selecting program settings
- 5. Starting a program
- 6. End of program – removing the laundry
- Timer
- Program chart
- Changing the program sequence
- Fragrance flacon
- Cleaning and care
- Frequently Asked Questions
- Technical Service
- MIELE
- IMPORTANT SAFETY INSTRUCTIONS
- Installation and connection
- Technical data
- Supervisor level
Supervisor level
87
Opening the supervisor level
11:02
Programs Favorites Supervisor
Help
Touching the sensor control takes
you to the supervisor level.
Access via code
The supervisor level is accessed using
a code.
Factory default: The code is 000.
Change code
You can alter the supervisor-level
access code to protect the tumble
dryer from unauthorized access.
Carefully enter a new code.
Please inform Technical Service if
you have forgotten your new code.
Technical Service will have to reset
the code.
Make a note of your new code and
store it in a safe place.
Closing the settings menu
Touch the sensor control.
The display will then go back to the
previous menu level.
Touch the sensor control.
The display will change to the main
menu.
Controls / Display
Language
The display can be set to appear in
one of several different languages. To
select the language you want, go to
the Languagessub-menu.
You can change the language as
follows:
– Permanently using the supervisor
level (=“Supervisor language”).
– For the duration of the current
program only using the sensor
control. The supervisor language is
displayed again at the end of the
program.