Operating and Installation Instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the tumble dryer
- Initial commissioning
- 1. Notes on correct laundry care
- 2. Loading the tumble dryer
- 3. Selecting a program
- 4. Selecting program settings
- 5. Starting a program
- 6. End of program – removing the laundry
- Timer
- Program chart
- Changing the program sequence
- Fragrance flacon
- Cleaning and care
- Frequently Asked Questions
- Technical Service
- MIELE
- IMPORTANT SAFETY INSTRUCTIONS
- Installation and connection
- Technical data
- Supervisor level
Supervisor level
92
Program selection
Controls
You can select whether the tumble
dryer is operated as a “laundromat”
machine. Shortcuts are the easiest
way to operate the machine.
Operating staff are unable to change
pre-set programs.
Tip: Start by configuring all necessary
settings and changes to the tumble
dryer before adjusting any of the
options below.
Caution: When activating any of
these options, the supervisor level
will no longer be available.
You will no longer be able to access
the supervisor level via the display.
Please follow the instructions below
if you wish to change any other
settings.
Opening the supervisor level
(laundromat version)
Switch the tumble dryer on and open
the dryer door.
Touch the Start/Stopsensor control
and hold it down while carrying out
steps–.
Close the tumble-dryer door.
Wait until the Start/Stopsensor
control, which will now be flashing
quickly, lights up constantly...
...and then release the Start/
Stopsensor control.