Operating instructions

Adjusting the door shelf/bottle
shelf
^
Push the door/bottle shelf upwards,
then remove it by pulling it forwards.
^
Replace the door/bottle shelf at the
required position. Ensure that it is
pushed back into position securely.
Moving the bottle holder
The bottle holder can be moved to the
left or right to create more room for
drinks cartons, for example.
The bottle holder can be removed
completely (e.g. for cleaning).
^
Push the bottle shelf upwards, then
remove it by pulling it forwards.
^
Pull the bottle holder upwards to
remove it from the rear edge of the
bottle shelf.
Adjustable shelves /
Adjustable shelves with LED
lighting
The LED lighting is located in the
stainless steel trim of the adjustable
shelves.
You can illuminate the refrigerator
section as you wish by moving the
shelves.
If the lighting is not working, check
that the shelves are positioned in the
side supports correctly:
The shelves have metal discs
(contacts) in the left-hand front corner
which supply power to the LED
lighting. Make sure when inserting the
shelves that the contacts click into the
shelf supports correctly.
Moving the adjustable shelves /
adjustable shelves with LED lighting
The shelves can be adjusted according
to the height of the food.
^
Raise the shelf slightly at the front,
and pull it forwards a little until the
notch at the side is in line with the
shelf support. It can then be raised or
lowered to the required level.
The raised edge at the back of the shelf
must face upwards to prevent food
from touching the back of the appliance
and freezing to it.
Adjusting the interior fittings
42