Operating instructions

Interior lighting
Problem Possible cause Remedy
The LED lighting on
one of the shelves
is not working.
The shelf has not been
positioned correctly on the
shelf supports.
^
Push the shelf in until it
clicks into position.
The LED lighting on
all of the shelves is
not working.
Liquid has been spilt onto
the LED lighting on one of
the shelves or the metal
discs (contacts) in the
left-hand shelf supports.
The safety switch off
mechanism has switched
off the interior lighting.
^
Wipe the stainless steel
trim with LED lighting with
a damp cloth and dry it or
leave it outside the
appliance to dry. Clean
the metal discs (contacts)
in the shelf supports by
wiping and drying them.
Make sure that the contacts
are clean and dry before
inserting the shelves with
lighting in the appliance.
^ Push the shelf in until it
clicks into position.
^ Close the appliance door.
When the door is opened
again, the interior lighting
will come on.
If this is not the case, then
there is a fault.
^
Call the Miele Service
Department.
Problem solving guide
60