Operating instructions Vacuum cleaner S 5000 To prevent accidents and machine damage, read these instructions before installation and use. UV M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Guide to the vacuum cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Before using the vacuum cleaner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Included accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE The manufacturer cannot be held responsible for any damage caused by non-compliance of these Important Safety Instructions. WARNINGTo reduce the risk of fire, electric shock or injury: Before using Check the voltage rating of the vacuum cleaner before connecting the power cord to an electrical outlet.
IMPORTANT SAFETY INSTRUCTIONS Use Do not use on people or animals. Do not use outdoors or on wet surfaces. Only dry surfaces should be vacuumed. Use only as described in this manual. Use only Miele recommended accessories. The manufacturer cannot be held responsible for damage caused by non-compliance with these Important Safety Instructions. This appliance is intended strictly for household use only. Do not allow the vacuum cleaner to be used as a toy. Close attention is necessary when used near children.
IMPORTANT SAFETY INSTRUCTIONS Do not pull or carry by the cord, use the cord as a handle, close a door on the cord, or pull the cord around sharp edges or corners. Do not run the appliance over the cord. Keep the cord away from heated surfaces. Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord. Do not handle the plug or vacuum with wet hands. Keep hair, loose clothing, fingers and all parts of the body away from openings and moving parts.
IMPORTANT SAFETY INSTRUCTIONS Accessory use Unplug the vacuum when changing accessories, especially the Turbobrush, Powerbrush and Cordless Powerbrush ACCU NOVA. The socket on the vacuum cleaner (depending on model) must only be used for the Miele Powerbrush specified for use with this appliance. Danger of injury. The Miele Powerbrush is a motor driven accessory for use only with Miele vacuum cleaners. The vacuum must not be used with another manufacturer’s powerbrush.
Guide to the vacuum cleaner Some models come standard with one of the following accessories, which are not shown in this figure. A separate Operating manual of the respective accessory is supplied with the vacuum.
Guide to the vacuum cleaner a Handpiece (depending on model) * b Suction power buttons + / – * c Standby button for vacuum pauses * d LED * e Locking button f Telescopic wand * g Telescopic wand release button * h Elbow i Powerbrush outlet* j Dust compartment lid release k Dust compartment filter (motor protection) l Dust bag m Floor tool * n Carrying handle o Fastener for the Powerbrush outlet cap p Park-System (on both sides of the vacuum) q Exhaust filter * r Foot switch for cord rewind s Suction power s
Before using the vacuum cleaner Attaching the suction hose ^ Insert the elbow into the suction socket until it clicks. Use the inlet guides to direct insertion. Removing the suction hose ^ Press the release buttons at the sides of the elbow and lift the hose from the socket.
Before using the vacuum cleaner Connecting the handpiece and the telescopic wand ^ Insert the handpiece into the telescopic wand until it clicks. Use the inlet guides to direct insertion. ^ To release the handpiece from the telescopic wand press the locking button (see arrow) and pull the handpiece away from the telescopic wand. Adjusting the telescopic wand One section of the telescopic wand is fitted inside the other and can be adjusted to your height for comfortable vacuum cleaning.
Before using the vacuum cleaner Connecting the rug/floor tool (depending on model) ^ Insert the telescopic wand into the floor brush and turn in either direction until it locks with a click. ^ To release the floor brush from the telescopic wand, press the locking button (see arrow) and pull the wand out of the floor brush. The floor brush is suitable for cleaning carpets, rugs, and hard surfaces. For flooring susceptible to scratches, use one of the special Miele floor brushes (see "Optional accessories").
Included accessories The following accessories are included: a Crevice nozzle b Dust brush with natural bristles c Upholstery tool d Filter frame The filter frame is supplied only with those models which are fitted with an "ACTIVE air clean" or "HEPA" exhaust filter as standard. The filter frame is required to replace one of these filters with a "Super Air Clean" filter (see "Maintenance and care - Exchanging Exhaust Filters"). Taking the accessories out ^ Press the release button.
Included accessories Crevice tool For cleaning in folds, crevices and corners. Dust brush with natural bristles For cleaning moldings, ornate or carved articles, etc. The head of the dusting brush swivels and can be turned to attain the best cleaning position.
Included accessories Upholstery tool For cleaning upholstery, mattresses, cushions, curtains, covers, etc. Standard floor brush The standard floor brush can be used for normal cleaning of carpets, rugs, hard surfaces, carpeted stairs, etc. The comfort handle is shown as an example for all handles and may differ from your individual model.
Use Power cord ,Unwind the cord completely to aid the vacuum in dissipating heat. Unwinding ^ Hold the plug and pull out the power cord. ,To reduce the risk of electric shock, the vacuum has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not alter the plug in any way. Danger of overheating and damage.
Use While vacuuming The vacuum cleaner can also stand on its end for vacuuming stairs, drapes, etc. ,To prevent static electricity your hand must touch the metal inlay on the underside of the vacuum handpiece. Be certain to continuously touch this inlay when vacuuming fine dust, flour or sawdust as these materials are more likely to create a static discharge.
Use Adjusting the suction The suction power can be adjusted depending on the type of flooring. By reducing the suction power the floor brush can be pushed easier. The symbols on the controls indicate the type of use the settings are suitable for.
Use Rotary selector ^ Turn the rotary selector to the desired suction power setting. On some models the symbol of the selected power level lights green. + / – controls Press and hold the respective foot switch until the display lights the symbol of the desired power green. ^ Press the + control to select a higher setting. ^ Press the – control to select a higher setting.
Use Opening the air inlet valve The air inlet valve is designed to provide a quick, convenient reduction of suction power, e.g. when moving from a carpet to an area rug. ^ Open the air inlet valve far enough to reduce the power. Opening the air inlet valve reduces the power to the tool being used.
Transport and storage Park-System (Unable to use with the Powerbrush SEB 236) A Park-System has been designed to conveniently park the telescopic wand at the vacuum cleaner during pauses. ^ A special parking attachment is fitted to all floor brushes. Insert the lower clip on the floor brush into the slot on the end of the vacuum cleaner from above. Turning on and off with the Park-System Some models are equipped with an On/Off switch in the Park-System.
Transport and storage Transport and storage ^ For easier transportation and storage stand the vacuum cleaner vertically. ^ Insert both clips of the floor brush into the two point holder on either side of the vacuum (this function cannot be used with the Elelectrobrush SEB 236). This makes the vacuum easier to carry or store. Push the parts of the telescopic wand into each other for greater stability.
Maintenance and care ,Turn off and unplug the vacuum before performing any maintenance work. If in use turn the Cordless Rechargeable Powerbrush ACCU NOVA off. Purchasing new dustbags and filters Replacement dustbags and filters can be purchased from your local Miele vacuum dealer or Miele. The Miele filter system consists of the following three components. Which dustbags and filters are the right ones? – Dustbag Purchase original Miele dustbags with the letter G/N.
Maintenance and care When to change the dustbag Change the dustbag when the colored marker in the dustbag change indicator fills the display. Miele dust bags are disposable and made to be used only once. Do not attempt to reuse. Checking the dustbag change indicator ^ Attach the floor tool to the vacuum cleaner. Perform this test with the floor tool only, since other attachments can affect the function of the dustbag change indicator. ^ Turn the vacuum cleaner on and select the highest power setting.
Maintenance and care How to change the dustbag ^ Lift the release button for the dust compartment lid and raise the lid until it clicks into place. ^ Grasp the collar by the two finger holes and pull it out from the dustbag holder. The dustbag has a flap which closes automatically to prevent dust from escaping when the dustbag is removed. ^ Insert the new dust bag as far as it will go into the dustbag holder. Do not unfold the dustbag when taking in out of the box.
Maintenance and care When to change the exhaust filter Your model will have either the: a Super Air Clean A Super Air Clean filter is supplied with every box of Miele dustbags and should be changed when starting a new box of dustbags. b Active Air Clean (black) c Active HEPA (blue) These filters should be changed approximately once a year. Change the filter sooner if it is obviously soiled or no longer effective. Make a note of the date on the filter.
Maintenance and care Exhaust filter change indicator Some models are equipped with an exhaust filter change indicator (Reset button) which is designed to alert the user when to change the "Active Air Clean" or "Active HEPA" filter. The indicator will light after about 50 hours of operation which is equivalent to a year of average use. The vacuum cleaner can still be used with the exhaust filter indicator lit.
Maintenance and care Replacing the "Super Air Clean" filter ^ Open the dust compartment lid. ^ Open the filter frame until it locks into place and remove the used "Super Air Clean" filter by the clean corner (see arrow). ^ Insert the new filter (either way up). ^ Close the filter frame. ^ Close the dust compartment lid firmly until it clicks into place.
Maintenance and care Replacing the "Active Air Clean" filter and the "Active HEPA" filter ^ Open the dust compartment lid. ^ Lift and remove the filter. ^ Insert a new filter and press it downwards. ^ Close the dust compartment lid firmly until it clicks into place. Resetting the filter change indicator The filter change indicator (Reset button) must be reset each time the filter is replaced. To do this, the vacuum cleaner must be plugged in.
Maintenance and care Exchanging Exhaust Filters Your model can have either: a Super Air Clean b Active Air Clean (black) c Active HEPA (blue) Please note 1. If you wish to replace the a Super Air Clean filter with the b ACTIVE air clean filter or the c Active HEPA filter, you must remove the filter frame* before inserting the new type of filter. 2. If you use the a Super Air Clean filter you have to insert it into the filter frame *.
Maintenance and care When to change the dust compartment filter Change the filter each time you open a new box of genuine Miele dustbags. A filter is supplied with every box of Miele dustbags. How to change the exhaust filter ^ Open the dust compartment lid. ^ Lift the filter frame and remove the used exhaust filter at the clean side (see arrow). ^ Insert the new filter. ^ Close the filter frame.
Maintenance and care When to change the thread catcher The thread catcher pads on the bottom of the rug and floor tool and the upholstery tool should be replaced as soon as they appear worn. Changing the thread catcher ^ Use a knife or similar object to remove the thread catcher pads from the slots. ^ Press the new thread catchers into the slots. Servicing the floor roller ^ Use a coin to release the roller pin and pull it out. ^ Push and take out the roller axle. ^ Take out the roller.
Maintenance and care ,Turn off the vacuum and unplug it from the outlet before performing any maintenance work. If in use turn the Cordless Rechargeable Powerbrush ACCU NOVA off. Vacuum cleaner and accessories The vacuum cleaner and other plastic accessories can be cleaned with a damp cloth or a cleaner suitable for plastics. ,Do not use abrasive, glass or all purpose cleaners! They will damage the surface.
Frequently asked questions What if the vacuum turns off automatically or a warning light , comes on? The vacuum has overheated. The temperature limiter automatically turns the vacuum off. Some models also have a warning light , which comes on to indicate that the vacuum has overheated. This can occur if, for instance, large articles block the suction tube or when the filter bag is full or contains particles of fine dust.
Technical Service In the event of a fault which you cannot fix yourself please contact the Miele Service Department at the phone number on the back of this booklet. ^ Please quote the model type of your appliance. This can be found on the data plate on the bottom of the vacuum.
Optional accessories Some models come equipped with one or more of the following accessories. Powerbrushes Observe the cleaning instructions of the floor manufacturer. Models designed for use with a Powerbrush have a release button on the cover cap to the connection socket. To use a powerbrush the SES 119 or SES 130 electrical hose and SET 210 electric wand must be obtained. If there is no Powerbrush socket, the Powerbrush ACCU NOVA with a rechargeable battery can be used instead.
Optional accessories Powerbrush SEB 236 This Powerbrush is 3" (60 mm) wider and more powerful than the SEB 217-3 model. It includes: – a height adjustment – a light – a multifunction indicator. Cordless Rechargeable Powerbrush ACCU NOVA This Powerbrush is operated with a rechargeable battery and can also be used with vacuum models without a Powerbrush connector.
Optional accessories Turbobrush Observe the cleaning instructions of the floor manufacturer. The turbobrush is recommended for cleaning short to medium pile carpeting. It is mechanically driven by the suction power of the vacuum. In addition to dust particles it also removes stubbornly adhered threads, hairs and carpet fluff. Hand Turbobrush The Hand Turbobrush is intended for vacuuming upholstery, mattresses, car seats, carpeted stairs and other areas inaccessible with the standard Turbobrush.
Optional accessories Hard floor brush SBB 235-3 To vacuum sturdy hard floors, e.g. tiles and stone floors. Parquet floor brush Special brush with natural bristles intended for cleaning parquet and laminate floors, especially those susceptible to scratching. Floor tool SBB 300-3 For cleaning all hard flooring. Especially suitable for vacuuming niches and tight spaces.
Optional accessories Universal brush For dusting books, shelves, etc. Radiator brush (only usable with the crevice nozzle) For cleaning radiators, narrow shelves and crevices.
Optional accessories Mattress tool For cleaning deep crevices, mattresses and upholstery. Crevice nozzle 12" (300 mm) For cleaning in folds, crevices and corners.
Optional accessories Hygiene lock with active charcoal Minimizes the escape of dust and odor when the hose is removed for transport or storage. The cap can be fastened to the hose during vacuuming. Flexible Hose Extender To extend the hose by 5 ft. (1.5 m). The hose adapter is inserted between handpiece and hose. The flexible hose extender can only be used with a non-electric hose.
Optional accessories MicroSet This set is specially designed for cleaning small objects and difficult to reach areas (such as PC keyboards, stereo equipment, carved furniture, ornaments, models, etc). Accessory set consists of: – Micro hose with combi nozzle (crevice nozzle and dust brush) – Micro dust brush – Micro crevice nozzle – Extension CarClean Set Plus Specially designed for cleaning car interiors.
Optional accessories Active Air Clean filter (black) A special active charcoal filter which absorbs odors from the dust collected in the dustbag, helping to prevent odors. The "ACTIVE air clean filter" can be used in place of the existing exhaust filter. There is no difference in the fine dust performance of the "Active Air Clean" and the "Super Air Clean" filter. Active HEPA filter (blue) The "Active HEPA" filter combines activated charcoal and HEPA filtration in one.
Caring for the environment Disposal of the packing materials Disposing of the dustbag and filters The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Genuine Miele dustbags and filters are made of environmentally friendly materials. They can be thrown out with the household trash provided the vacuum has been used only for normal household dust. Ensure that any plastic wrappings, bags, etc.
All rights reserved / 0306 M.-Nr.
