Operating instructions Vacuum cleaner S 5001 To prevent accidents and appliance damage, read these instructions before installation and use. en - US, CA M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Guide to the vacuum cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Before using the vacuum cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Included accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE WARNINGTo reduce the risk of fire, electric shock or injury: Before using ~ Check the voltage rating of the vacuum cleaner before connecting the power cord to an electrical outlet. Your power source should correspond with the voltage rating plate located on the underside of the vacuum. Use only household AC outlets.
IMPORTANT SAFETY INSTRUCTIONS Use ~ Do not use on people or animals. ~ Do not use outdoors or on wet surfaces. Only dry surfaces should be vacuumed. ~ Use only as described in this manual. Use only Miele recommended accessories. ~ This appliance is intended for household use only. ~ Do not allow the vacuum cleaner to be used as a toy. Close attention is necessary when used near children. ~ Unwind the cord completely to aid the vacuum in dissipating heat.
IMPORTANT SAFETY INSTRUCTIONS ~ Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord. ~ Do not handle the plug or vacuum with wet hands. ~ Keep the power cord, hair, loose clothing, fingers and all parts of the body away from openings and moving parts. ~ Do not place anything into the openings of the vacuum. Do not use if any openings are blocked; keep them free of dust, lint, hair, or anything that may reduce air flow. ~ This appliance is equipped with a power cord reel.
IMPORTANT SAFETY INSTRUCTIONS ~ The socket on the vacuum cleaner (depending on model) must only be used for the Miele Powerbrush specified for use with this appliance. ~ Danger of injury. The Miele Powerbrush is a motor driven accessory for use only with Miele vacuum cleaners. The vacuum must not be used with another manufacturer’s powerbrush. ~ Do not use the vacuum without an accessory attached. The rim could be damaged and injuries could result from sharp edges.
Guide to the vacuum cleaner Some models come standard with one of the following accessories, which are not shown in this figure. A separate Operating manual of the respective accessory is supplied with the vacuum.
Guide to the vacuum cleaner a Handpiece (depending on model) * b Suction power buttons + / – * c Standby button for vacuum pauses * d LED * e Locking button f Telescopic wand * g Telescopic wand release button * h Elbow i Powerbrush outlet* j Dust compartment lid release k Dust compartment filter (motor protection) l Dustbag m Floor tool * n Carrying handle o Fastener for the Powerbrush outlet cap p Park-System (on both sides of the vacuum) q Exhaust filter * r Foot switch for cord rewind s Suction power se
Before using the vacuum cleaner Attaching the suction hose ^ Insert the elbow into the suction socket until it clicks. Use the inlet guides to direct insertion. Removing the suction hose ^ Press the release buttons at the sides of the elbow and lift the hose from the socket.
Before using the vacuum cleaner Connecting the handpiece and the telescopic wand ^ Insert the handpiece into the telescopic wand until it clicks. Use the inlet guides to direct insertion. ^ To release the handpiece from the telescopic wand press the locking button (see arrow) and pull the handpiece away from the telescopic wand. Adjusting the telescopic wand One section of the telescopic wand is fitted inside the other and can be adjusted to your height for comfortable vacuum cleaning.
Before using the vacuum cleaner Connecting the standard floor brush (depending on model) ^ Insert the telescopic wand into the floor brush and turn in either direction until it locks with a click. ^ To release the floor brush from the telescopic wand, press the locking button (see arrow) and pull the wand out of the floor brush. The floor brush is suitable for cleaning carpets, rugs, and hard surfaces.
Included accessories The following accessories are included: a Crevice nozzle b Dust brush with natural bristles c Upholstery tool Taking the accessories out ^ Press the release button. The accessory compartment lid opens. ^ Take out the accessory needed. ^ Close the lid securely.
Included accessories Crevice tool For cleaning in folds, crevices and corners. Dust brush with natural bristles For cleaning moldings, ornate or carved articles, etc. The head of the dusting brush swivels and can be turned to attain the best cleaning position.
Included accessories Upholstery tool For cleaning upholstery, mattresses, cushions, curtains, covers, etc. Standard floor brush (depending on model) The standard floor brush can be used for normal cleaning of carpets, rugs, hard surfaces, carpeted stairs, etc. For safety, when vacuuming stairs it is best to start at the bottom and move upwards. The comfort handle is shown as an example for all handles and may differ from your individual model.
Use Power cord ,Unwind the cord completely to aid the vacuum in dissipating heat. Unwinding ^ Hold the plug and pull out the power cord. ,To reduce the risk of electric shock, the vacuum has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not alter the plug in any way. Danger of overheating and damage.
Use While vacuuming Adjusting the suction The vacuum cleaner can also stand on its end for vacuuming stairs, drapes, etc. The suction power can be adjusted depending on the type of flooring. By reducing the suction power the floor brush can be pushed easier. ,To prevent static electricity your hand must touch the metal inlay on the underside of the vacuum handpiece.
Use Rotary selector ^ Turn the rotary selector to the desired suction power setting. + / – controls Press and hold the respective +/control until the desired power setting lights up green. ^ Press the + control to select a higher setting. ^ Press the – control to select a higher setting. + / - controls with "AutoEco" setting When the vacuum is turned on the "AutoEco" setting is selected automatically. ^ Press the + foot control to change to "Turbo", the highest power setting.
Use Opening the air inlet valve The air inlet valve is designed to provide a quick, convenient reduction of suction power, e.g. when moving from a carpet to an area rug. ^ Open the air inlet valve far enough to reduce the power. Opening the air inlet valve reduces the power to the tool being used.
Transport and storage Park-System (Unable to use with Powerbrushes SEB 228 and SEB 236) A Park-System has been designed to conveniently park the telescopic wand at the vacuum cleaner during pauses. ^ A special parking attachment is fitted to all floor brushes. Insert the lower clip on the floor brush into the slot on the end of the vacuum cleaner from above. Turning on and off with the Park-System Some models are equipped with an On/Off switch in the Park-System.
Transport and storage Transport and storage ^ For easier transportation and storage stand the vacuum cleaner vertically. ^ Insert both clips of the floor brush into the two point holder on either side of the vacuum (this function cannot be used with Electrobrushes SEB 228 and SEB 236). This makes the vacuum easier to carry or store. Push the parts of the telescopic wand into each other for greater stability.
Maintenance and care ,Turn off and unplug the vacuum Purchasing new dustbags and filters The Miele filter system consists of the following three components. Original Miele dustbags and filters can be purchased from an authorized Miele vacuum dealer or by visiting the Miele store at http://store.miele.com. cleaner before performing any maintenance work. – Dustbag – Exhaust filter – Dust compartment filter Each of these components must be changed periodically to maintain the vacuum cleaner’s efficiency.
Maintenance and care When to change the dustbag Change the dustbag when the colored marker in the airflow indicator fills the display. Miele dustbags are disposable and made to be used only once. Do not attempt to reuse. Checking the airflow indicator ^ Attach the standard floor brush (depending on model) to the vacuum cleaner. Perform this test with the standard floor brush only, other attachments can affect the function of the airflow indicator.
Maintenance and care How to change the dustbag ^ Lift the release button for the dust compartment lid and raise the lid until it clicks into place. The dustbag has a closing flap which closes automatically when the dust compartment lid is raised to prevent any dust from escaping. ^ Grasp the collar and remove the dustbag from the holder. ^ Insert the new dustbag as far as it will go into the dustbag holder. Do not unfold the dustbag when taking it out of the box.
Maintenance and care When to change the exhaust filter Your model will have either the: a Air Clean An Air Clean filter is supplied with every box of Miele dustbags and should be changed when starting a new box of dustbags. b Active Air Clean SF-AAC 50 (black) c Active HEPA SF-AH 50 (blue) These filters should be changed approximately once a year. Change the filter sooner if it is obviously soiled or no longer effective. Make a note of the date on the filter.
Maintenance and care Exhaust filter change indicator Some models are equipped with an exhaust filter change indicator (Reset button) which is designed to alert the user when to change the "Active Air Clean" or "Active HEPA" filter. The indicator will light after about 50 hours of operation which is equivalent to a year of average use. The vacuum cleaner can still be used with the exhaust filter indicator lit.
Maintenance and care Replacing the "Air Clean" filter ^ Open the dust compartment lid. ^ Open the filter frame until it locks into place and remove the used "Air Clean" filter by the clean corner (see arrow). Do not use more than one filter at a time. ^ Insert the new filter (either way up). ^ Close the filter frame. If you wish to replace the Air Clean filter with an Active Air Clean filter or Active HEPA filter see "Maintenance and care - Exchanging exhaust filters".
Maintenance and care Replacing the "Active Air Clean" filter and the "Active HEPA" filter ^ Open the dust compartment lid. Do not use more than one filter at a time. ^ Lift and remove the filter. ^ Insert a new filter and press it downwards. If you wish to replace the Active Air Clean filter or the Active Hepa filter with an Air Clean filter see "Maintenance and care Exchanging exhaust filters". ^ Close the dust compartment lid firmly until it clicks into place.
Maintenance and care Exchanging Exhaust Filters Your model can have either: a Air Clean b Active Air Clean SF-AAC 50 (black) c Active HEPA SF-AH 50 (blue) Please note 1. If you wish to replace the a Air Clean filter with the b ACTIVE air clean filter or the c Active HEPA filter, you must remove the filter frame before inserting the new type of filter. 2. If you use the a Air Clean filter you have to insert it into a filter frame *. Do not use more than one filter at a time.
Maintenance and care When to change the dust compartment filter Change the filter each time you open a new box of genuine Miele dustbags. A filter is supplied with every box of Miele dustbags. How to change the exhaust filter ^ Open the dust compartment lid. ^ Lift the filter frame and remove the used exhaust filter at the clean side (see arrow). ^ Insert the new filter. ^ Close the filter frame.
Maintenance and care When to change the thread catcher The thread catcher pads on the bottom of the standard floor brush and the upholstery tool should be replaced as soon as they appear worn. Changing the thread catcher ^ Use a knife or similar object to remove the thread catcher pads from the slots. ^ Press the new thread catchers into the slots. Servicing the floor roller ^ Use a coin to release the roller pin and pull it out. ^ Push and take out the roller axle. ^ Take out the roller.
Maintenance and care ,Turn off the vacuum and unplug it from the outlet before performing any maintenance work. Vacuum cleaner and accessories The vacuum cleaner and other plastic accessories can be cleaned with a damp cloth or a cleaner suitable for plastics. ,Do not use abrasive, glass or all purpose cleaners! They will damage the surface. Dust compartment The dust compartment can, if necessary, be cleaned using a dry cloth, dusting brush or a second vacuum to remove any dust.
Frequently asked questions What if the vacuum turns off automatically or a warning light , comes on? The vacuum has overheated. The temperature limiter automatically turns the vacuum off. Some models also have a warning light , which comes on to indicate that the vacuum has overheated. This can occur if, for instance, large articles block the suction tube or when the filter bag is full or contains particles of fine dust.
Technical Service In the event of a fault which you cannot fix yourself please contact the Miele Service Department at the phone number on the back of this booklet. ^ Please quote the model type of your appliance. This can be found on the data plate on the bottom of the vacuum.
Optional accessories Some models come equipped with one or more of the following accessories. Powerbrushes Observe the cleaning instructions of the floor manufacturer. Models designed for use with a Powerbrush have a release button on the cover cap to the connection socket. To use a powerbrush the SES 119 electrical hose and SET 210 or SET 220 electric wand must be obtained. Powerbrush SEB 217-3 (EB02) The Powerbrush is intended for intensive cleaning and restoration of robust carpeting.
Optional accessories Powerbrush SEB 236 (EB01) This Powerbrush is 3" (60 mm) wider and more powerful than the SEB 217-3 model. It includes: – a height adjustment – a light – a multifunction indicator. Turbobrush - Turbo Comfort-3 Observe the cleaning instructions of the floor manufacturer. The turbobrush is recommended for cleaning short to medium pile carpeting. It is mechanically driven by the suction power of the vacuum.
Optional accessories Floor brush - Hardfloor-3 To vacuum sturdy hard floors, e.g. tiles and stone floors. Floor brush - Parquet-3 Special brush with natural bristles intended for cleaning parquet and laminate floors, especially those susceptible to scratching. The parquet floor brush can be cleaned with the vacuum cleaner using the crevice nozzle if necessary. Floor brush - Parquet Twister with swiveling head For cleaning all hard flooring, e.g. parquet and tiles.
Optional accessories Universal brush For dusting books, shelves, etc. Radiator brush (only usable with the crevice nozzle) For cleaning radiators, narrow shelves and crevices.
Optional accessories Mattress tool For cleaning deep crevices, mattresses and upholstery. Crevice nozzle 12" (300 mm) For cleaning in folds, crevices and corners.
Optional accessories MicroSet This set is specially designed for cleaning small objects and difficult to reach areas (such as PC keyboards, stereo equipment, carved furniture, ornaments, models, etc). Accessory set consists of: – Micro hose with combi nozzle (crevice nozzle and dust brush) – Micro dust brush – Micro crevice nozzle – Extension CarClean Set Plus Specially designed for cleaning car interiors.
Optional accessories Active Air Clean filter (black) A special active charcoal filter which absorbs odors from the dust collected in the dustbag, helping to prevent odors. The "ACTIVE air clean filter" can be used in place of the existing exhaust filter. There is no difference in the fine dust performance of the "Active Air Clean" and the "Air Clean" filter. Active HEPA filter (blue) The "Active HEPA" filter combines activated charcoal and HEPA filtration in one.
Caring for the environment Disposal of packing materials The cardboard box and packing materials protect the appliance during shipping. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. These items pose a danger of suffocation. 42 Disposing of the dustbag and filters These are made from environmentally friendly materials and can be placed in the regular household garbage.
Alteration rights reserved / 2311 M.-Nr. 07 915 310 / 01 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.
