Operation Manual

How to replace the Air Clean filter
(dia. 34 + 35)
Do not use more than one exhaust
filter at a time.
^
Open the dust compartment lid.
^
Press the release catch on the filter
grille and open the grille until it clicks.
^
Hold the used Air Clean filter by one
of the clean, unsoiled sections.
^
Replace it with a new Air Clean filter.
If you wish to replace the Air Clean
filter with an ActiveAirClean 50 filter
or with an HEPA AirClean 50 filter,
see "Replacing one type of exhaust
filter with another".
^ Close the filter grille.
^ Close the dust compartment lid.
How to replace an ActiveAirClean 50
filter or a HEPA AirClean 50 filter
(dia. 36 + 37)
Do not use more than one exhaust
filter at a time.
^
Open the dust compartment lid.
^
Lift the filter and remove it.
^
Replace with a new filter, and push it
down into place.
^
Press the reset button ~ for the
exhaust filter change indicator (dia.
14).
^
After approx. 10 - 15 seconds a thin
red stripe will appear in the left hand
side of the display (dia. 15).
If you wish to use an Air Clean filter,
see "Replacing one type of exhaust
filter with another".
^
Close the dust compartment lid.
Replacing one type of exhaust filter
with another
Depending on model, your vacuum clea
-
ner will be fitted as standard with one of
the following exhaust filters (dia. 11):
a Air Clean
b ActiveAirClean 50 (black)
c HEPA AirClean 50 (white)
Please note:
1. If you wish to replace the Air Clean
filter a with an ActiveAirClean 50 filter b
or an HEPA AirClean 50 filter c,itis
essential that you remove the filter grille
before fitting the new type of filter (dia.
37).
Press the reset button ~ for the
exhaust filter change indicator (dia. 14).
If you wish to replace the ActiveAirClean
50 filter b or the HEPA AirClean 50 filter
c with an Air Clean filter a, it is essential
that you also fit the filter grille *, (dia. 35).
* Filter grille – see "Optional
accessories".
Do not use more than one exhaust
filter at a time.
en
41