Operating instructions
Table Of Contents
- Contents
- Caring for the environment 3
- Description of the appliance 4
- Warning and Safety instructions 6
- Preparing for use 12
- Using the accessories supplied 16
- Use 17
- Setting down, transportation and storage 22
- Maintenance and care 23
- Purchasing new dustbags and filters 23
- Ordering the correct dustbags and filters 23
- When to change the dustbag 24
- Replacing the dustbag 25
- When to change the exhaust filter 26
- Correctly replacing the Air Clean filter 27
- Replacing the Active Air Clean or Active HEPA filter 28
- Replacing one type of exhaust filter with another 29
- When to change the dust compartment filter (for motor protection) 30
- Correctly changing the dust compartment filter 30
- When to change the battery in the radio frequency operated handle 31
- How to change the battery in the radio frequency operated handle 31
- When to change the thread lifters 32
- Correctly replacing the thread lifters 32
- Cleaning and care 33
- Problem solving guide 34
- After sales service / Electrical connection 35
- Optional accessories 36
Interrupting operation
To pause the appliance during
operation:
^
Press the stand-by button - on the
handle.
,
The stand-by button is designed
to pause the vacuum cleaner for
short periods of time whilst
vacuuming. Otherwise there is a
danger of overheating.
At the end of the pause you can do one
of the following:
^ Press the stand-by button - again to
switch the vacuum cleaner back on at
the setting you were using before
pausing it.
^ Press the + button to switch the
vacuum cleaner back on using the
highest power setting.
^ Press the - button to switch the
vacuum cleaner back on using the
lowest power setting.
Use
21