Operating instructions
Table Of Contents
- Contents
- Caring for the environment 3
- Description of the appliance 4
- Warning and Safety instructions 6
- Preparing for use 12
- Using the accessories supplied 16
- Use 17
- Setting down, transportation and storage 22
- Maintenance and care 23
- Purchasing new dustbags and filters 23
- Ordering the correct dustbags and filters 23
- When to change the dustbag 24
- Replacing the dustbag 25
- When to change the exhaust filter 26
- Correctly replacing the Air Clean filter 27
- Replacing the Active Air Clean or Active HEPA filter 28
- Replacing one type of exhaust filter with another 29
- When to change the dust compartment filter (for motor protection) 30
- Correctly changing the dust compartment filter 30
- When to change the battery in the radio frequency operated handle 31
- How to change the battery in the radio frequency operated handle 31
- When to change the thread lifters 32
- Correctly replacing the thread lifters 32
- Cleaning and care 33
- Problem solving guide 34
- After sales service / Electrical connection 35
- Optional accessories 36
In the event of a fault that you cannot
easily remedy, please contact
–
your Miele Vacuum Cleaner
Specialist or
or
–
Miele.
The telephone number and address
for Miele is given on the back page.
Electrical connection
All work should be carried out by a
suitably qualified and competent
person in strict accordance with
national and local safety regulations.
The voltage and rated load are given
on the data plate located underneath
the vacuum cleaner. Please ensure that
these match the household mains
supply. The fuse rating is quoted on the
plug.
The appliance is supplied with a cable
and moulded plug ready for connection
to a 230V/50Hz a.c. single phase
supply.
Test Marks.....................Electrical safety
......................................C-Tick Mark
Electrically suppressed
according to..................AS/NZS 1044
After sales service / Electrical connection
35