Operating instructions
Table Of Contents
- Contents
- Caring for the environment 3
- Description of the appliance 4
- Warning and Safety instructions 6
- Preparing for use 12
- Using the accessories supplied 16
- Use 17
- Setting down, transportation and storage 22
- Maintenance and care 23
- Purchasing new dustbags and filters 23
- Ordering the correct dustbags and filters 23
- When to change the dustbag 24
- Replacing the dustbag 25
- When to change the exhaust filter 26
- Correctly replacing the Air Clean filter 27
- Replacing the Active Air Clean or Active HEPA filter 28
- Replacing one type of exhaust filter with another 29
- When to change the dust compartment filter (for motor protection) 30
- Correctly changing the dust compartment filter 30
- When to change the battery in the radio frequency operated handle 31
- How to change the battery in the radio frequency operated handle 31
- When to change the thread lifters 32
- Correctly replacing the thread lifters 32
- Cleaning and care 33
- Problem solving guide 34
- After sales service / Electrical connection 35
- Optional accessories 36
~
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a
person responsible for their safety.
Safety with children
~
Supervise children whilst you are using the vacuum
cleaner. This vacuum cleaner is not a toy! To avoid the
risk of injury, keep children well away and do not allow
them to play with it or to use the controls.
~
Older children may only use the appliance when its
operation has been clearly explained to them and they
are able to use it safely, recognising the dangers of
misuse.
~
Cleaning and maintenance work may only be carried
out by older children under the supervision of an adult.
~
The batteries for the radio controls in the handle
must be kept out of the reach of children.
Technical safety
~
Ensure that the connection data on the data plate
(voltage and frequency) match the mains electricity
supply. This data must correspond in order to avoid the
risk of damage to the appliance.
Warning and Safety instructions
7